767447
7
Zoom out
Zoom in
Previous page
1/16
Next page
Opening and closing the latch:
The latch can be opened using the enclosed handles.
Maintenance
When the ceramic burner has been used very often, discolorations on the top can occur. This is normal and does no harm to the
quality of the product.
Do not use an abrasive product for cleaning the insert. Clean the surfaces with a moist piece of cloth or a non-abrasive stainless
steel cleanser.
Glass screens can be cleaned with a ceramic cook top cleaner.
Possible problems and solutions:
Changes and/or alterations to the insert, surface or burner are unacceptable and will cause the warranty to expire.
Ruby Fires cannot be held responsible for possible damages or personal injuries caused by misuse or incompetent use of the insert
and ceramic burner.
Important:
The ceramic burner is to be used for decorative purposes only and not as a primary source of heating.
Bio ethanol is a hazardous material of dangle level UN 1987, level 3
The use of the ceramic burner as a multi-burner or open fi re for liquid or solid combustible materials is not permitted.
The ceramic burner is to be extinguished using the latch on the topside.
When the ceramic burner is overfi lled there is a risk of spilling the liquid fuel e.g. when it is bumped into. This can cause uncontrolla-
ble fl ames.
The fl ames cannot be adjusted by using the latch. This should always be completely opened when in use.
Do not smoke while (re)fi lling or lighting the burner. Risk of explosion!
Never change the construction of the ceramic burner.
Warning! Never re-fi ll a hot or warm ceramic burner. Risk of explosion!
The fl ames should never directly touch the inside of the metal insert.
Avoid physical contact with the bio ethanol.
It is prohibited for children, people under the infl uence of alcohol, drugs or medications, or people who are physically or mentally not
in good condition, to use the Ceramic Burner.
Keep children and pets at a safe distance.
Problem Possible cause Solution
Existence of soot Wrong fuel Use ONLY Ruby Fires bio ethanol 98%
Existence of soot Fire-opening is covered with decoration material Make sure the fi re-opening is free of decoration material
Duration of fi re too short Wrong fuel (e.g. gel) Use ONLY Ruby Fires bio ethanol 98%
Duration of fi re too short Burner has not been fi lled completely Extinguish the burner. Let it cool down for at least
30 minutes and then re-fi ll.
Flames too high Wrong fuel or draft Use ONLY Ruby Fires bio ethanol 98%
Flames too low, not visible Burner has not been fi lled completely Extinguish the burner. Let it cool down for at least
30 minutes and then re-fi ll.
Burner makes a rustling noise Wrong fuel (e.g. gel) or overfi lled Use ONLY Ruby Fires bio ethanol 98%
Flames are blue, not visible Fuel is almost fi nished Extinguish the burner. Let it cool down for at least
30 minutes and then re-fi ll.
Flames remain after the Open the latch and quickly close it again to refrain
latch has been closed the oxygen supply
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruby Fires Roma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruby Fires Roma in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info