589953
9
Zoom out
Zoom in
Previous page
1/20
Next page
INSTRUCTIONS FOR USE
- The appliance can be operated either by the switches located on the front of the
fireplace heater or by the supplied remote control.
- First of all, pull the bar and open it. Then turn on the power switch on the left. The
indicator light will be red.
MANUAL OPERATION
- Press the POWER button once to turn on the appliance and the fire effect. A red
indicator light will appear to indicate that the function is ON.
- Press the button to choose a brighter or dimmer setting for the flame display
and embers.
- Press several times to go through the different settings.
- Press the HEATING I button once for the low heat setting; press again to switch off
the heat setting.
- Press the HEATING I button once for the high heat setting; press again to switch off
the heat setting.
REMOTE OPERATION
- It takes some time for the receiver to respond to the transmitter. Do not PRESS the
buttons more than once within two seconds for correct operation.
- Press the POWER button once to turn on the appliance and the fire effect. A red
indicator light will appear to indicate that the function is ON.
- Press the button to choose a brighter or dimmer setting for the flame display
and embers. Press several times to go through the different settings.
- Press the HEATING I button once for the low heat setting; press again to switch off
the heat setting.
- Press the HEATING I button once for the high heat setting; press again to switch off
the heat setting.
SAFETY CUT-OFF
This appliance is fitted with a safety cut-off which will operate if the fireplace heater over-
heats (e.g. due to blocked air vents). For safety reasons, the fireplace heater will NOT automa-
tically reset. To reset the appliance, disconnect the appliance from the mains supply for at
least 15 minutes. Reconnect the supply to the mains and switch on the appliance.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruby Fires Elski at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruby Fires Elski in the language / languages: Dutch as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ruby Fires Elski

Ruby Fires Elski User Manual - English, German, Dutch, French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info