579639
75
Zoom out
Zoom in
Previous page
1/99
Next page
Easy CD & DVD Creator 6 Expanded User’s Guide: Creator Classic
Chapter 7: Making Bootable Discs
63
Note When the disc has been burned, take it to the system you
want to boot from. Make sure it has bootable disc support enabled,
insert the bootable disc in your CD or DVD drive, and reboot the
system. If you are able to start your system from the bootable disc,
you have successfully made a bootable disc.
Tips for Using Floppy Disk Emulation
When booting from a bootable disc, your bootable disc will emulate a
bootable floppy, the disc will in effect become Drive A, and your floppy
drive will be shifted to Drive B.
You can copy other information onto your disc outside of the boot image.
Other information that can be included on the disc might be:
Hard disk utilities
Application installers
Backup utilities, etc.
If you wish to access information on your disc outside of the boot image,
you must make sure the following files are included your boot image:
mscdex.exe
cdrom.sys
Device drivers for your CD or DVD drives
If these files are not included in the boot image, the disc will not be
accessible. Device drivers for your CD or DVD drives can be found on
software that came with your drive.
Advanced Settings
Load Segment
The Load Segment specifies the hexadecimal address in memory where the
master boot record will be loaded. To create a standard bootable disc, you
will not need to change this value.
ECDC_6_0_UserGuide_CC.book Page 63 Monday, December 16, 2002 1:45 PM
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roxio Creator Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roxio Creator Classic in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info