Manual Rowi HIT 2000-1 Q (page 31 of 40) (English, German)

668105

Zoom out

Zoom in

1/40

31/40

3.2.2 Stand assembly

1. First insert the 4 supporting feet (Fig. 1a, No. 1) into each side of the middle bracket.

2. Then place the vertical pipe (Fig. 1a, No. 2) in the middle of the supporting feet and

fasten everything by screwing with the large plastic nut.

3. Then join the metal rod to the vertical pipe. You can use the fastening nut (Fig. 1a, No.

3) to fasten the rod at the required height.

4. The heating head is fastened using the fastening material (Fig. 1a, No. 5).

3.3 Starting use

After removing the packaging, as well as correct assembly (standing or wall mounting), the

appliance can be put into operation. Proceed as follows for this:

1. Make sure that the thermostat rotary knob is turned back to the MIN position. Then

connect the patio heater to an earthed socket protected with an earth-leakage circuit

breaker.

2. Now switch on the appliance by turning the thermostat rotary knob (see Fig. 2b, No. 1)

as far as it will go. The heating element starts and heats up to the maximum heat output

of 2000 W.

The heat output is controlled infinitely: If you then wish to reduce the temperature, turn

the thermostat rotary knob anticlockwise until the required setting.

3. To switch off, turn the thermostat rotary knob back anticlockwise as far as the limit stop,

and then pull out the power plug.

Wait until the appliance has cooled down before covering it or putting it away.

3.4 Storage

Protect the patio heater from dust, dirt and insects. Cover the appliance with a sheet so that

it is protected from impurities and damage or malfunctions caused by this.

3.5 Repacking for private transport purposes

Always pack the appliance in its original packaging for transportation, if possible, to pre-

vent transport damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowi HIT 2000-1 Q in the language / languages: English, German as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowi HIT 2000-1 Q Manual

Product: