763410
6
Zoom out
Zoom in
Previous page
1/39
Next page
10 11
Problem Possible Causes Solutions
Water runs out
of the holes of
the soleplate.
You are using steam
for the rst time or
you have not used it
for some time.
Press the steam control
button on, pointing the
iron away from your
ironing board until the
iron produces steam.
The setting is not
correct (1 dot /
2 dots) and the
soleplate is not hot
enough to produce
steam.
Set the iron at 3 dots
(••• or MAX) and wait
for the iron thermostat
light to go out before
activating the steam
button again.
You are performing
the Anti Calc
procedure
It is normal that
water runs out of
the soleplate while
performing the Anti
Calc procedure
Water streaks
appear on the
linen.
Your ironing board is
saturated with water
because it is not
suitable for use with
an appliance.
Check that your ironing
board is suitable. We
recommend that you
use a vented/mesh
type ironing board.
Brown streaks
come through
the holes in
the soleplate
and stain the
linen.
You are using
chemical descaling
agents or additives
in the water ironing.
Never add this type of
product in the water
tank (see “for what
water may be used”).
Contact an Approved
Service Centre.
Problem Possible Causes Solutions
The soleplate is
dirty or brown
and may stain
the linen.
You are ironing
at too high a
temperature.
See our
recommendations
regarding temperature
control setting.
The “anti calc”
indicator is
ashing.*
The Anti Calc
procedure must be
performed.
See section 2.1
"Maintenance"
The anti calc
indicator is still
ashing.
You have not
pressed the Anti
Calc button.
Press the Anti Calc
button until the light
stops ashing.
The anti calc
indicator is still
ashing after
performing
Anti calc
procedure.
The anti calc
procedure has not
been correctly done.
See section 2.1
"Maintenance" to
perform correctly the
anti calc procedure".
* Depending on the model
If you have any problems or queries please call our Customer
Relations team rst for expert help and advice
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta VR8324 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta VR8324 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 18,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info