802586

Rowenta RR8587 - X-Plorer Serie 75 S Plus Manual

23
Zoom out
Zoom in
Previous page
1/433
Next page
23
EN
FAULT SOLUTION
Cannot start the robot
• Make sure the robot is connected to power supply.
• Make sure the battery is fully charged.
• Make sure the switch on the robot is turned ON.
The robot suddenly stops working
• Check whether the robot is stuck or blocked by obstacles.
• Check wether the battery is too low.
• If the problem persists, please switch OFF the robot, wait for 3 seconds, and switch
ON to restart it.
• The appliance may be overheating :
ū stop the appliance and leave cool for at least 1 hour.
ū If it overheats on repeated occasions, contact the Approved Services Center.
Cannot charge the robot
• Make sure the station is properly connected or contact an Approved Services
Center to change the charger.
• Check whether the indicator on the robot is ashing during charging.
• Wipe dust o charging plates with dry cloth.
The charger is getting hot This is perfectly normal. The robot can remain permanently connected to the station
without any risk.
The robot cannot return to the
station
• Clear the station of objects within 0.5 m on the left and right sides and within
1.5 m ahead.
• Make sure that the robot starts cleaning from the station without abnormal
movement.
• When the robot is near the station, it can return faster. But if the station is located
far away, the robot will need more time to return. Please wait during its return.
• Clean the charging plates.
The cleaning schedule is not
executed
• Make sure the robot has been powered on.
• Set the time and schedule the time for automatic cleaning in the app.
• Make sure the appointment time has been set correctly.
• Check wether the battery level is too low to start cleaning.
• The robot will not start any scheduled cleaning when a task is being performed.
Suction whistling
• Check the suction inlet for any obstruction.
• Empty the dust bin.
• Clean the lter.
• Check wether the lter is wet due to water or other liquids on the oor. Let the lter
dry naturally thoroughly before use.
• Check wether the dust bin and water tank are properly installed.
• The intake head is clogged :
ū Remove the brush and clean it.
The central brush does not rotate • Clean the central brush.
• Check wether the central brush and the brush cover are correctly installed.
Abnormal action or sweep route of
the robot
• Carefully clean the sensors with dry cloth.
• Switch OFF the robot, wait for 3 seconds and swith ON to restart the robot.
No water released during mopping
• Make sure there is enough water in the water tank.
• Check wether the mop module is correctly installed.
• Check whether the water outlet is blocked.
The robot cannot connect to your
Wi-Fi network
Ensure that your Wi-Fi router supports 2.4GHz and 802.11 b/g/n bands as this
equipment does not support 5GHz bands..
6.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RR8587 - X-Plorer Serie 75 S Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RR8587 - X-Plorer Serie 75 S Plus in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 151.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info