Manual Rowenta RO8324 SILENCE FORCE Multi-cyclonic (page 15 of 54) (English, German, Dutch, French, Italian, Portuguese, Portuguese, Spanish)

653806

Zoom out

Zoom in

1/54

USE

* Depending on models: either equipment specific to cer-

tain models or available as an optional accessory.

1 • Fitting the elements onto the

appliance

Clip the end of the hose to the suction inlet located at the

ront of the appliance (fig.1). To remove, unclip the end using

the clip and remove.

Fix the accessory support* (27) to the notch in the self-

tanding position (7) located at the rear of the vacuum

cleaner and store the accessories on top (fig. 2).

• Fit the telescopic metal tube to the end of the grip until you

hear a 'click' (fig.3) (to remove, press the tube lock button

and pull).

Fit the ERGO COMFORT SILENCE nozzle (19) to the end of

the telescopic metal tube until you hear a 'click' (fig.4) (to

remove, press the button on the nozzle and pull).

Adjust the telescopic metal tube to the required length using

the telescopic system (fig.5).

Fit the required accessory on to the end of the telescopic

metal tube or the grip:

- For rugs and carpets : use the 2-position nozzle (19) on

carpet position (brush retracted) or turbo brush* (fibres and

animal hair).

- For hard flat floors and hard flat floors with crevices (such

as tiled floors): use the 2-position nozzle (19) on hard floor

position (brush extended) or, for better results, use the hard

flat floor nozzle* (22a*) without the removable brush.

- For fragile hard flat floors, such as parquet, it is

recommended to use the hard flat floor nozzle (19*) or

(22b*).

For corners and hard-to-reach areas: use the telescopic

crevice nozzle*.

For upholstery and delicate surfaces: use the brush with

the grip (EASY BRUSH) or the upholstery nozzle*.

2 • Plugging in the power cord and

switching on the appliance

Unwind the power cord completely, plug in your vacuum

cleaner and press the ON/OFF pedal (fig. 8).

Adjust the suction power using the manual power control*

on the grip (fig.9):

• Position (MIN) for vacuuming delicate fabrics

(net curtains, textiles)

• Position (Medium) for everyday vacuuming for

all types of floors, which are only

slightly dirty

• Position (MAX) for vacuuming hard floors and

very dirty rugs and carpets.

3 • Storing and transporting the

appliance

After use, switch off your vacuum cleaner by pressing the

ON/OFF pedal and unplug it (fig. 10).

Rewind the power cord by pressing the power cord rewind

pedal (fig. 11).

It is easy to carry your vacuum cleaner using the handle (3).

Do not carry your appliance using the dust compartment

handle (fig.12).

When storing your vacuum cleaner, place the tube in its

storage compartment at the back of the appliance (fig.13).

You do not need to remove the accessory support* (27) to

store the accessory range.

IMPORTANT:

The nozzle for hard flat floor with crevices 22a* is

used to measure performance associated to the

energy label. This nozzle allows you to optimize the

dust-collection performance of your appliance on

hard flat floors with crevices.

IMPORTANT! If the accessory base* is positioned

ehind the appliance, it is essential to remove the

accessories in order to open the vacuum cover.

ERGONOMIC RECOMMENDATIONS

Ergonomic, the ERGO COMFORT SILENCE range

has been designed to facilitate and improve user

comfort when vacuuming.

To prevent bending over and to ensure upright

posture, make sure you:

1. Adjust the length of the ERGO COMFORT SILENCE

telescopic metal tube to your body size (fig.6).

2. Place your other hand in front of the ERGO

COMFORT grip handle (fig.7).

ATTENTION: do not operate your vacuum cleaner

without the filtration system fitted (foam, microfilter

and filter).

IMPORTANT: Always switch off and unplug your

vacuum cleaner before changing the accessories.

758270-02_RO_ASPI_SF_MULTI-CYCLONIC_758270/02 11/06/14 15:38 Page9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO8324 SILENCE FORCE Multi-cyclonic in the language / languages: English, German, Dutch, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 3,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta RO8324 SILENCE FORCE Multi-cyclonic Manual

Product: