762706

Rowenta RO8015 Manual

14
Zoom out
Zoom in
Previous page
1/101
Next page
15
2 • If you have the automatic
model*: automatic cleaning of
the HEPA filter and emptying of
the dust container
Cleaning is performed automatically and requires
no action from you. It is carried out when required
when your vacuum cleaner is switched on or off.
NOTE: Your vacuum cleaner makes a clicking
noise during the cleaning operation, this is
completely normal (fig.21).
We recommend that you empty the dust container
each time after use and/or after cleaning the filter.
Proceed as follows:
- Unplug your vacuum cleaner and open the cover
by pressing the "OPEN" button (fig.18) and
remove the bowl (fig.19).
- Remove the filter assembly composed of the
separator and the filter (3 and 5) (fig.22) tapping
it gently against the side of the bowl to remove
any excess dust (fig.23) then empty the dust
container (fig.24).
- Clean the separator cover using a cloth is if it is
dirty (fig.25).
- Refit the filter assembly (3 and 5) inside the dust
container (fig.26). Then refit the dust container
into its housing and close the cover of the vacuum
cleaner (fig.27).
3 • Servicing the HEPA filter
IMPORTANT Empty the dust container
afterwards.
IMPORTANT The suction power may still
remain unsatisfactory after the mechanical or
automatic cleaning of the HEPA filter
(see Cleaning and maintenance paragraph). In
this case it must be cleaned manually.
REMARK if you notice that the suction
power of your appliance drops, you can force
the automatic cleaning of the HEPA filter. In
this case, switch off your appliance and press
the ON/OFF button twice consecutively
(fig.28).
In this case, open the vacuum cleaner cover
(fig.18), remove the dust container and release
the HEPA filter (fig.29).
Remove the HEPA filter (5) from the separator (3)
(fig.30) and tap the filter above a dustbin
(fig.31) then clean the outside wall of the filter
under the cold water tap (fig.32).
Refit the HEPA filter in the separator (fig.33).
Lock it in position (fig.34). Refit the dust
container into its housing in the vacuum cleaner
and close the cover of the appliance (fig.27).
4 • Cleaning your vacuum cleaner
Wipe the body of the appliance and the
accessories with a soft cloth. Wash the dust
container and the separator with clean water
(fig.35-36) then dry them with a soft cloth
(fig.37).
WARNING Do not place the inside
wall of the HEPA filter under water.
Do not touch or rub the folds of the HEPA
filter. Leave the HEPA filter to dry for 24H
before refitting it in the appliance.
IMPORTANT If your HEPA filter is
damaged, you may purchase another from
your dealer or from an Approved Service
Centre (see attached list).
IMPORTANT Do not use aggressive or
abrasive detergent products. The
transparency of the dust container and/or the
separator cover may alter in time but this
does not change the performances of the
appliance.
EN
751271_SF Cyclonic_16L_751271 08/12/10 11:23 Page15
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO8015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO8015 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info