Manual Rowenta RO7845 (page 17 of 68) (English, German, Dutch, French, Italian, Portuguese, Spanish)

762569

Zoom out

Zoom in

1/68

CLEANING AND MAINTENANCE

If your vacuum cleaner will not start

• The appliance is not powered. Check that the appliance is

plugged in correctly.

If your vacuum cleaner has no suction power

• An accessory, the tube, hose, separator (4a), air/dust

separation grille (4b) or the separation compartment (4c) is

blocked: unblock them.

• Clean the HEPA filter ref ZR9020.01* (17a) as indicated in

the procedure and put it back in its compartment or wash the

washable HEPA filter ref RS-RT3733* (17b) following the

procedure shown and put it back in its compartment. If the

HEPA filter is damaged, replace it.

• Filtration cassette (ref RS-RT3732): clean the black foam

filter (18a) and the micro filter (18b) as indicated in the

procedure.

If your vacuum cleaner has less suction power, is noisy or makes

a whistling noise

• An accessory, the tube, hose, separator (4a), air/dust

separation grille (4b) or the separation compartment (4c) is

partially blocked: unblock them.

• The dust compartment is full: empty and wash it.

• The vacuum cleaner cover is not fitted correctly: close

properly.

• The dust compartment is not correctly fitted: fit it correctly.

• The nozzle's manual power switch* is open: close it.

TROUBLESHOOTING

IMPORTANT: stop your vacuum cleaner immediately by

pressing the Start/Stop button as soon as it stops

performing as normal and before performing any checks.

4 • Cleaning the HEPA filter (17)

If necessary, remove the accessory support* then place the

vacuum cleaner in the vertical position (Fig.27).

Open the HEPA filter hatch (Fig.28).

Remove the HEPA filter from its housing (fig.29). Clean the

HEPA filter by gently patting it over a dustbin (fig. 30).

Reposition it in its housing (Fig.32).

Reposition the hatch until you hear a click indicating that it

is closed.

5 • Wash the washable HEPA filter*

ref. RS-RT3733* (17b)

If necessary remove the accessory support* then place the

vacuum cleaner in the vertical position (Fig.27).

Open the HEPA filter access hatch (Fig.28)

Remove the HEPA filter from its compartment (fig.29).

Tap the HEPA filter whilst holding it over a dustbin (Fig.30),

then pass it under some running water and leave it to dry for

at least 24 hours (Fig.31) (make sure that the filter is well and

truly dry before putting it back in place).

Put the HEPA filter back in its compartment (Fig.32). Push the

hatch back until you hear a locking click.

The washable HEPA filter* ref RS-RT3733 is available at

shops or at Approved Service Centres.

6. Cleaning the air/dust separator

system (4)

Remove the hose from the vacuum cleaner.

Open the vacuum cleaner cover (fig. 21-22).

Press the separator release button (fig.33) then remove from

the separation system (fig.34).

Remove the separation compartment (4c) by turning slightly

to the left (fig.35) then separate the two components (fig.36).

Wash the components (4a+b and 4c) in clear water (fig. 37)

and leave to dry for 6 hours.

Refit the filter system components (4):

- Reposition the separation compartment (4c) on the

separation system (4a+b) (fig. 38) by turning slightly until you

hear the click indicating that it is closed (fig. 39).

- Then reposition the entire separation system (4) in the

appliance (fig. 40) and close the cover.

7 • Cleaning your vacuum cleaner

Wipe the body of the vacuum cleaner and accessories with

a soft damp cloth, then dry with a dry cloth.

Wash the dust compartment (5a+ 5b) under clear or soapy

water, then dry with a dry cloth.

IMPORTANT: replace the HEPA filter every 12 months.

The HEPA filter (ref ZR9020.01) is available from your

dealer or in Approved Service Centres.

IMPORTANT: do not use aggressive or abrasive

detergents. The transparency of the dust

compartment and/or front cover and/or cover may

change over time; this does not affect the appliance

performance.

ATTENTION: do not wash the vacuum cleaner cover

under clear water. Clean using a soft wet cloth.

* According to model: these systems are specific to certain mo-

dels or are accessories available as an option.

The filtration cassette ref. RS-RT3732 (18a+18b) is

available from shops or at Approved Service

Centres.

IMPORTANT: if the appliance does not perform as normal

after cleaning the black foam filter and microfilter on your

vacuum cleaner, clean the HEPA filter.

Important!: only the HEPA filter ref RS-RT3733*

should be washed

ATTENTION: your appliance is equipped with a

safety system (19) for detecting the filtration

cassette: the cover cannot be closed if the filtration

cassette is not fitted (18a+18b).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO7845 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta RO7845 Manual

Product: