Manual Rowenta RO6712 (page 14 of 71) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

762628

Zoom out

Zoom in

1/71

power cord.

Do not move the vacuum cleaner by pulling on the power

cord, the appliance must be moved using its carrying

handle.

Do not use the power cord or the hose to lift the appliance.

Switch off and unplug your vacuum cleaner after each use.

Always switch off and unplug your vacuum cleaner before

maintenance or cleaning.

Your vacuum cleaner is fitted with a safety appliance which

prevents the motor from overheating. In certain cases (when

used on chairs, sofas, etc.) the safety appliance may be

tripped and the appliance may make an unusual noise that

is not serious. Only use original Rowenta accessories and

filters.

Check that all the filters are in place.

Do not operate your vacuum cleaner without the filtration

system fitted (foam, microfilter and filter).

Never place the foam and microfilter in the appliance unless

they are completely dry.

If you have any difficulties in finding accessories or filters for

this vacuum cleaner, contact the Rowenta Customer

Service.

USING FOR THE FIRST TIME

1• Fitting the elements onto the

appliance

Clip the end of the hose to the suction inlet located at the

front of the appliance (fig.1). To remove, unclip the end

using the clip and remove.

Fix the accessory holder* (I-II.26) to the notch in the self-

standing position (7) located at the back of the vacuum

cleaner and store the accessories on top (fig.2).

If you have the ERGO COMFORT chain of accessories

without the tube/nozzle Locking system (I)*

- Fit the telescopic metal tube to the end of the nozzle until

you hear a 'click' (Fig 3) (To remove, press the tube lock

button and pull).

- Fit the nozzle for all floor types* (I.20) to the end of the

telescopic metal tube (Fig.4a).

- Adjust the telescopic metal tube to the desired length

using the telescopic system (Fig 4b).

If you have the ERGO COMFORT chain of accessories

with the tube/nozzle Locking system (II)*

- Fit the telescopic metal tube to the end of the nozzle until

you hear a 'click' (Fig 3) (To remove, press the tube lock

button and pull).

- Fit the nozzle for all floor types* (II.20) to the end of the

telescopic metal tube until you hear a 'click' (Fig.5a) (To

remove, press the tube lock button and pull).

- Adjust the telescopic metal tube to the desired length

using the telescopic system (Fig 5b).

Fit the corresponding accessory to the end of the metal

telescopic tube or the nozzle:

- For rugs and carpets: use the multi-surface nozzle in the

retracted brush position or the Turbobrush* (fibres and

animal hairs).

- For smooth floors with joins (tiled floors) : use the 2-

position nozzle (I-20* II-20*, depending on the model) on the

smooth floor setting (extended brush position), or, for a

better result, use the nozzle for smooth floors with joins

without the removable brush (I-27a* II-27a*, depending on

the model).

- For smooth floors, including delicate smooth floors

(parquet flooring), use the 2-position nozzle setting (I-20* II-

20*, depending on the model) on the smooth floor setting

(extended brush position), or, for a better result, use the

nozzle for smooth floors with the removable brush (I-27b* II-

27b* depending on the model).

- For corners and hard-to-reach areas: use the telescopic

crevice nozzle*.

- For furniture and fragile surfaces: use the integrated

nozzle brush (EASY BRUSH) or the upholstery nozzle*.

2 • Plugging in the power cord and

switching on the appliance

Unwind the power cord completely, plug in your vacuum

cleaner and press the ON/OFF button (fig. 8).

USE

IMPORTANT! If the accessory holder* is positioned

behind the appliance, it is essential to remove the

accessories in order to open the vacuum cover.

IMPORTANT: Always switch off and unplug your

vacuum cleaner before changing the accessories.

ERGONOMIC RECOMMENDATIONS

Ergonomic, the ERGO COMFORT range has been

designed to facilitate and improve user comfort

when vacuuming.

To prevent bending over and to ensure upright

posture, make sure to:

1. Adjust the length of the ERGO COMFORT

telescopic metal tube to your body size (fig.6).

2. Place your second hand in front of the ERGO

COMFORT nozzle handle (fig.7).

*According to model: these parts are specific to certain models

or they are accessories that can be purchased separately.

IMPORTANT : The nozzle for smooth floors with joins

(I-27a* II-27a*) is used to measure the performance

related to the energy label.

The nozzle allows your appliance to achieve optimum

dust removal performance on smooth floors with joins.

IMPORTANT: do not operate your vacuum cleaner

without the filtration system fitted (foam, microfilter and

filter).

RO_ASPIRATEUR_EFC_765275-01_765275_01 11/07/14 14:24 Page9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO6712 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta RO6712 Manual

Product: