762735
15
Zoom out
Zoom in
Previous page
1/71
Next page
11
* According to model : These parts are specific to certain
models or they are accessories that can be purchased se-
parately.
CLEANING AND MAINTENANCE
(H)EPA ([High] Efficiency Air Particle Filter) filters retain even
the smallest particles.
Thanks to the (H)EPA filter, the air released into the room is
cleaner than the air vacuumed.
Withdraw the tube from the vacuum opening (Fig.2)
Open the lid of your vacuum cleaner (fig.15).
Remove the dust box (12) from its compartment by using
the handle (Fig.16).
a. Clean the dust box
Press the opening button (OPEN) of the dust box lid and then
lift the lid (Fig.17) to withdraw it completely (Fig.18)
Then withdraw the casing that contains the separator from
the lid by pressing on the OPEN button (Fig.23-24).
Detach the separator from its casing (Fig.25).
Rinse the separator (13 a), its casing (13b) and the dust box
lid (12b) under clean water. You may use some mild soap
(Fig.26).
Dry them with a cloth (Fig 27).
Once they are dry, place the separator back in its casing by
using the notch designed for that purpose (Fig.28), then
replace the whole assembly (13 a + 13b) inside the dust box
lid by using the appropriate notch (Fig.29) until you hear a
'CLICK' (Fig.30)
b. Clean the filtration system
Press on the opening clips of the HEPA filter case (Fig.31)
Withdraw the filter case HEPA (16) from the dust box (12c)
(Fig 32)
Separate the foam filter (16b) from the HEPA filter (16a)
(Fig.33)
Tap the HEPA filter over a dustbin (Fig.34)
Wash the foam filter (16b) and the HEPA filter (16a) under
clear running water and allow to dry 12 H (Fig.35).
Wash the dust box (12c) under running water (Fig.36) and
dry it with a soft cloth.
Once it is dry, reposition the foam filter (16b) on the HEPA
filter (16a) (Fig.37)
Replace the filter case (16a + 16b) on the dust box (12c) by
using the notches designed for that purpose (Fig.38) until
you hear a 'CLICK'. (Fig.39)
Place the lid back on the box by putting the corresponding
parts on the appropriate notches (Fig.20), then pull it down
until you hear a 'CLICK' (Fig.21).
Place the box back in its casing (Fig.22).
3 Replace the filtration system
The HEPA filter* case ref. ZR902301* is available at your local
retail store or at one of our Authorised Service Centres.
Withdraw the tube from the vacuum opening (Fig.2)
Open the lid of your vacuum cleaner (fig.15).
Remove the dust box (12) from its compartment by using
the handle (Fig.16).
Press on the opening clips of the HEPA filter case (Fig.40)
Withdraw the HEPA filter case (16) from the dust box (12c)
(Fig.41).
Throw the filter case (16a + 16b) in a dustbin (Fig.42) and
replace it with a new filter case (Fig.43-44).
Place the box back in its casing (Fig.22).
Close the lid of your vacuum cleaner.
4 Cleaning your vacuum cleaner
Wipe the body of the appliance and the accessories with a soft
cloth (Fig.45). Do not use any detergents, or corrosive or
abrasive products.
ATTENTION To clean the HEPA filter, wash it
under normal running water. In order to not
damage it, avoid scraping it with an accessory.
IMPORTANT Replace the filtration system once a
year.
IMPORTANT In order to improve the performance
of your vacuum cleaner, remember to clean the
dust box and the filtration system every 3 months.
EN
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO6235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO6235 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info