762563
16
Zoom out
Zoom in
Previous page
1/158
Next page
12
* According to model : this piece or accessory is specific to
certain models or can be bought separately.
4. CLEANING THE HEPA FILTER (14B)
The air we breathe contains particles that can be allergenic: larva and dust mite faeces, mould, pollen,
smoke, and animal waste (hair, skin, saliva, urine). The finest of these particles penetrate deeply into the
respiratory system, where they can cause inflammation and alter the respiratory function as a whole.
(H)EPA ([High] Efficiency Air Particle Filter) filters retain even the smallest particles. Thanks to the (H)EPA
filter, the air that is expelled back into the room is cleaner than the air vacuumed.
Pull simultaneously on the opening clips (13d) of the HEPA filter case - Fig.19.
Separate the black foam filter (14a) from the HEPA filter (14b) - Fig. 20.
Turn the HEPA filter (14b) over and tap the dust into a dustbin - fig. 37.
Then scrape the HEPA filter under warm water using the accessory (18b), then leave the HEPA filter to dry
for 24h - Fig. 38.
Once the foam is completely dry, assemble the HEPA filter case (14): black foam filter (14a) and HEPA fil-
ter (14b) under the dust tray (13) – Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 18.
Ensure that the HEPA filter (14b) is completely dry before you put it back in the appliance.
5. REPLACE THE FILTERING SYSTEM
5.1. HEPA FILTER CASE (14) - Ref. ZR0056 01
The HEPA filter case (ref. ZR0056 01 is available at your local retail store or at one of our Authorized Service
Centres.
Pull simultaneously on the opening clips (13d) of the HEPA filter case - Fig.19.
Separate the black foam filter (14a) from the HEPA filter (14b) - Fig. 20.
If the HEPA filter case (14) (black foam filter (14a) and HEPA filter (14b)) is damaged, throw it in the bin –
Fig. 39 - and replace it with a new HEPA filter case (ref. ZR0056 01).
Assemble the HEPA filter case (14): black foam filter (14a) and HEPA filter (14b) under the dust tray (13) –
Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 18.
5.2. MICROFILTER (8A) – Ref. ZR0056 01
The microfilter ref. ZR0056 01 is available at your local retail store or at one of our Authorized Service
Centres.
Remove the motor protection grill (8b) - Fig. 40.
Remove the microfilter (8a) – Fig. 41 – and keep the motor protection grill (8b).
Throw the microfilter (8a) in the bin – Fig. 42.
Place a new microfilter (8a) on the motor protection grill (8b) - Fig. 43.
Slide the ledges into the slots - fig. 44.
Screw on the motor protection grill (8b) - Fig. 45.
Before placing back the dust tray, make sure that the motor protection grill is placed properly.
CLEANING THE VACUUM CLEANER
Wipe the body of the vacuum cleaner and accessories with a soft damp cloth, then dry.
Wipe the lid with a dry cloth - fig. 46.
Do not use any detergents, or corrosive or abrasive products.
Warning! Make sure that the whole filter system is well placed before starting your appliance again.
Important: Change the HEPA filter case (14) every 6 months.
Important: Change the microfilter* every 6 months.
Important!
Remember to clean the HEPA filter case (14) [black foam filter (14a) and HEPA filter (14b)] every month.
RO_ASPIRATEUR_CITY_SPACE_903359_903359/01 12/06/13 15:34 Page12
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO2711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO2711 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info