544427
27
Zoom out
Zoom in
Previous page
1/36
Next page
2727
If your vacuum cleaner will not start
The appliance is not powered. Check that the
appliance is plugged in correctly.
If your vacuum cleaner has no suction power
An accessory, the tube, the flexible hose or
the pipe between the suction inlet (9) and the
separator are blocked, unblock them.
The separator cover is blocked: remove the
filter and clean it.
The HEPA filter is dirty: clean it (see Cleaning
and Maintenance paragraph). If the HEPA filter
is damaged, change it.
• The cover is not closed correctly: close it.
If your vacuum cleaner has les suction power,
is noisy or makes a whistling noise
An accessory, the tube, the flexible hose or
the pipe between the suction inlet (9) and the
separator are blocked, unblock them.
The dust container is full: empty it and wash
it.
• The dust container is not correctly fitted. Fit it
correctly
(fig.25).
The filter system (3 and 5) is saturated: see the
Cleaning and Maintenance paragraph. If the
HEPA filter is damaged, change it.
• The separator cover (3) is blocked: remove the
filter and clean it.
the manual power switch is open: close the
manual power switch on the power nozzle.
There is an air leak. Check that the dust
container is locked. Check that the end of the
flexible hose (16a) is fitted correctly. Check that
the filter system is fitted (3 and 5).
I
f the separator fills up
Dust accumulates in the bottom of the separator.
Check that the pipe between the bottom of the
separator and the dust container is not blocked.
Remove the filter assembly (3 and 5) and tap it
gently against the side of the bowl to remove any
excess dust
(fig.21).
• The inlet of the dust container is blocked.
Remove the dust container and empty it. Clean
the opening of the dust container (9).
If it is difficult to move the nozzle
Open the manual power switch on the power
nozzle.
If the power cord does not rewind completely
The power cord is slowed down when
rewinding: pull the power cord out again and
press the power cord rewind button.
If a problem persists, take your vacuum cleaner
to your local Rowenta Approved Service
Centre. Check the attached list of Rowenta
Approved Service Centres or contact the
Rowenta customer service (see contact details
on last page).
WARRANTY
• This product has been designed for domestic
use only. Any professional use, innapropriate
use or failure to comply with the instructions,
the manufacturer accepts no responsibility
and the guarantee will not apply.
• Read the instructions for use carefully before
using your appliance for the first time: any
use which does not conform to these
instructions will absolve Rowenta from any
liability.
TROUBLESHOOTING
IMPORTANT As soon as you notice that
your vacuum cleaner is not operating as well,
before carrying out any checks, switch it off
using the ON/OFF button and unplug the
power cord.
751270_SF Cyclonic_751270 10/11/10 14:32 Page27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO 8055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO 8055 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info