762874

Rowenta RH8850 Manual

12
Zoom out
Zoom in
Previous page
1/152
Next page
12
3 •
Turning the vacuum cleaner on
Remove the charger cable from the vacuum
cleaner.
Hold the vacuum cleaner by the handle and
slide the power switch down, to one of the
two following positions (g.6):
• “Floor”: for smooth oors (2.b)
In the «Floor» position, the electrobrush (11.a)
built into the Delta vacuum head, operates at
normal speed.
Note: regularly check that the wheels at the
back of the sucker attachment are clean.
• “Carpet / Booster” : for a better dust pick up
efciency on all kinds of oors. (2.c)
In the «Carpet» position, the Booster light (3)
below the power switch comes on to indicate
that the electrobrush (11.a) is operating at high
speed.
Autonomy of your vacuum cleaner * depen-
ding on the position of use:
Position 1
« Floor » Position 2
« Carpet/Booster »
18 Volts up to 40 MIN up to 30 MIN
24 Volts up to 50 MIN up to 40 MIN
USE OF THE ELECTROBRUSH
The Electrobrush is a motorised rotating
brush that ensures very effective cleaning.
It vacuums and cleans deep down. It has
bristles all along, enabling it to remove
threads and animal hair embedded in rugs
and carpets.
Note: If the sucker attachment adheres to the
surface too much, place the switch back to the
«Floor» position.
ATTENTION Do not vacuum large debris that
may block the brush and damage it.
Do not use the electro-brush on deep pile
carpets, animal fur and curtain fringes.
CLEANING THE ELECTROBRUSH
ATTENTION Always stop and unplug your va-
cuum cleaner before maintenance or cleaning.
Delicately cut the threads, hairs, animal fur,
etc. following the notch designed for this
purpose on the electrobrush (g.7).
FOR YOUR SECURITY
• Do not touch the rotating parts without
having stopped and unplugged the vacuum
cleaner.
• Do not use the vacuum cleaner on a wet
surface.
• Never immerse your appliance in water.
TROUBLESHOOTING
The electrobrush is working less efficiently or
is making an abnormal noise
• The rotating brush or the hose are clogged:
stop the vacuum cleaner and clean them.
• The brush is worn: please contact an
Authorised Service Centre to have the brush
changed.
• The belt is worn: please contact an
Authorised Service Centre to have the belt
changed.
The electrobrush stops in the middle of
vacuuming
• The heat safety device has come on: stop
the vacuum cleaner by moving the switch to
the OFF position (2.a) and unplug it. Make
sure that nothing is impeding the rotation of
the brush, if so remove the obstacle and clean
the electrobrush (g.7), then turn the vacuum
cleaner back on.
The electrobrush is difficult to move
• The suction power is too high: reduce the
suction power by moving the switch to the
«Floor» position (2b).
If the problem persists, take your vacuum
cleaner to the nearest Rowenta Approved
Service Centre.
See the list of Rowenta Authorised Service
Centres or contact the Rowenta Consumer
Service.
4 • Storage
After use, switch off your vacuum cleaner by
moving the switch to the OFF position (2a).
Your vacuum cleaner may then be put away
standing vertically wherever you want, in its
parking position.
To place the vacuum cleaner in its parking po-
sition: stand it vertically so as to lock it (Fig. 8)
To use it again: hold the handle and tilt it bac-
kwards to release it from the parking position
(Fig. 9)
EN
* Depending on model
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RH8850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RH8850 in the language / languages: All languages as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info