762940
13
Zoom out
Zoom in
Previous page
1/152
Next page
12 13
IMPORTANT Always stop and unplug your va-
cuum cleaner before maintenance or cleaning.
1 • Cleaning the dust
compartment (9)
1.a Quick emptying
When the dust compartment is full, empty it
as follows: remove the dust compartment by
sliding down (g.10), place it over a dustbin
and press the «push» button to open the
emptying hatch downwards and empty the
contents of the dust compartment (g.11).
Close the hatch (g.12), and replace the dust
compartment (g.13).
1.b Deep cleaning
The dust compartment should be cleaned out
regularly.
• Remove the dust compartment (g.10), then
separate each component (9).
• Remove the lter foam that protects the
motor (9c).
• Run the dust compartment (9a) under warm
water (g.14), along with the dust separator
(9b) and the cover (9d) and then let them dry
or wipe with a dry cloth.
• Wash the lter foam that protects the motor
(see paragraph 2).
• Once dry, replace the dust compartment
components, along with the replacement
lter foam (9c) that comes with your vacuum
cleaner.
• Close the dust compartment and reposition
it on the device.
2 • Cleaning the lter foam
that protects the motor (9c)
WARNING Never operate the vacuum cleaner
without the motor lter foam.
To preserve the efciency of your device,
do not vacuum extremely ne substances
(plaster, cement, ash ...) and clean the engine
protection lter at least once a month.
It is recommended that you clean the lter
foam more frequently if you see a drop in the
efciency of your vacuum cleaner.
• Remove the dust compartment cover (9d)
and then remove the lter foam protecting the
motor (9c) (g.15).
• Clean the lter foam that protects the motor
(9c) with warm soapy water. Rinse it and leave
it to dry for at least 12 hours before putting it
back in the vacuum cleaner (g. 16).
IMPORTANT For optimal protection of the mo-
tor, make sure the lter foam is dry before you
put it back in. It is therefore necessary to leave
it to dry for at least 12 hours. Your vacuum
cleaner comes with an additional foam lter
so you can use the device while the original
foam lter is drying.
WARNING Never wash the dust compartment
components or the engine lter foam in a
dishwasher.
3 • Caring for your vacuum
cleaner
Wipe the body of the vacuum cleaner with a
soft wet cloth, then dry using a dry cloth
(g. 17)
IMPORTANT Do not use detergents or any cor-
rosive or abrasive products. The transparency
of the dust compartment and/or dust separa-
tor cover may change over time. This does not
affect performance.
EN
CLEANING AND MAINTENANCE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RH8540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RH8540 in the language / languages: All languages as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info