762814

Rowenta RH7743 Manual

15
Zoom out
Zoom in
Previous page
1/28
Next page
11
4 • Set the vacuum power (fig. 9)
Max: Floors
Min: Furniture, delicate fabrics…
5 • Switch off your vacuum cleaner (fig. 10)
STORAGE (fig. 11)
CLEANING AND MAINTENANCE
The air we breathe contains particles, which may cause allergies; the larvae and waste of mites,
moulds, pollen, smoke and animal residues (hair, skin, saliva, urine). The finest particles penetrate into
the respirator where they may cause inflammation and completely alter the respiratory function.
HEPA filters (high efficiency particulate air filters, namely high efficiency filters for air-borne particle fil-
ters) make it possible to hold back the finest particles. Thanks to the HEPA filter, spent air in the room
is cleaner than vacuumed air.
IMPORTANT
Always switch off and disconnect your vacuum cleaner before servicing or cleaning. Check and clean
regularly your whole vacuum cleaner and the different filters.
ATTENTION
Never use your vacuum cleaner without the filtration system (microfilter and filter).
1 • Cleaning the dust container (5)
Quick emptying
When the dust container (5) is full, remove the cover from the vacuum cleaner (Fig. 12) then remove
the dust container (5) by sliding it slightly downwards (Fig. 13). Place it over a waste container and
press the button marked "Push" to tip the emptying flap down, then empty out the contents of the
container (Fig. 14). Close up the flap (Fig. 15) and refit the dust container, then refit the cover onto
the vacuum cleaner (Fig. 16).
Complete cleaning
The container assembly (5) requires regular cleaning.
Remove the cover from the vacuum cleaner (Fig. 12). Then remove the dust container (5) by sliding
it slightly downwards (Fig. 13). Then separate each element: Remove the dust container cap (5c) then
the HEPA filter (5b3).
Then remove the foam filter (5b2) and the separator (5b1).
Place the receptacle/dust container (5a) and separator (5b1) under warm water, then leave it to dry or
wipe it with a dry cloth (Fig. 17).
For cleaning the foam filter (5b2) : Please refer to Section 2 – CLEANING THE FOAM FILTER. For clea-
ning the HEPA filter (5b3) : For information on servicing filters, please refer to Section 3 – CLEANING
THE HEPA FILTER.
Once dry, refit the dust container (5) elements, then refit the complete assembly onto the vacuum
cleaner (Fig. 16).
Refit the vacuum cleaner cover (7).
2 • Cleaning the foam filter (5b2)
The foam filter (5b2) should be cleaned after every use, using warm soapy water (Fig. 18). Rinse and
leave to dry for at least 12 hours before refitting.
An additional foam filter is supplied with your vacuum cleaner so that you can continue to use your
vacuum cleaner while the original foam filter is drying.
* Depending on model
EN
RO_POWERLINE-CYCLONIC_RH79_903525-03.qxp_903525/03 04/08/2015 11:28 Page11
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RH7743 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RH7743 in the language / languages: English, German, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info