763143
7
Zoom out
Zoom in
Previous page
1/73
Next page
13
12
EN
4. After 15 seconds, the homepage is displayed with
the advice to launch a purification if the air quality is
anything except « excellent »
MEASURE MODE
Excellent
No purification
required in this room
See the details
5. To get more detailed information on the level of
Particles & Allergens, or Gas & VOCs, press
MODE MEASURE
Particles
& allergens
Gas & VOCs
127
AQI 127
AQI
43%
6. Replug the box on the air purifier by pushing both sides
and launch a purification if needed/wanted.
All the following features are unavailable when you are in measurement mode, with the air quality box
unplugged :
- AUTODAY, AUTONIGHT & ALLERGEN modes
- Historic function
Important : the alert light (3) will be flashing when the air quality box is unplugged and the user is
trying to set the autoday, autonight or allergen modes, as they are not available in measure mode.
6. MAINTENANCE
Always switch the appliance off and unplug it before conducting any maintenance operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Do not use any abrasive materials, as these may damage the surface of the product.
FILTERS
This appliance is equipped with 4 types of filters:
Frequency of cleaning/replacing the lters :
Filter Action Cycles
Pre-filter Clean Every 2 to 4 weeks
3-in-1: Prefilter & Active carbon filter & Allergy14 + filter
Replace Every 12 months
NanoCaptur+ filter Replace Color changing
(see Color chart on filter)
These figures are based on tests in which the air purifier is used for 8 hours per day in silence mode, for 10 months.
The recommended frequency for cleaning and replacing the filters may vary depending on the duration of use and
the operating environment. Refer to the app and the Air Quality Box to get exact information on when to change
your filters.
You may need to replace the filters more often depending on the air quality and how often the air
purifier is used. When one of the filters arrives at the end of its life (3-in-1 filter) OR needs to be checked
(NanoCaptur+ filter) OR needs to be cleaned (pre-filter), an alert will appear on the air quality box main
screens. You will also receive a notification on your mobile application.
Important! When an alert about filter saturation pops up on the screen of the air quality box, please
click on it or check your mobile application in order to know which filter has to be cleaned/replaced.
The pre-filter can be cleaned with a dry cloth.
Important: Resetting the filter
After replacing the filter, click on the alert and follow the instructions to reset the filter.
Or go into settings directly.
Performing a force reset:
If you replace a filter before the end of its lifespan, go into settings by pressing 3 seconds on the
navigation button. Select ‘filter management’ and follow the instructions to reset the filter.
To replace the filters, follow these instructions :
8
12
7
3
6
4
5
DISASSEMBLING / REASSEMBLING FILTERS
« TIPS FOR CHANGING FILTERS »
Avoid handling used lters if you suer from allergies or asthma.
Wear gloves and a mask when changing the lters, and wash your hands well afterwards.
Put used lters directly into a closed, air-tight bag before throwing them away with your
household waste to avoid spreading pollutants.
Prefilter Active Carbon
filter
Allergy14 filter NanoCaptur+
filter
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta PU8080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta PU8080 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 29,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info