763450

Rowenta HC1037 Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
•The appliance must be unplugged:
-before cleaning and maintenance procedures.
- if it is not working correctly.
-as soon as you have finished using it.
- if you leave the room, even momentarily.
•Do not use if the cord is damaged.
•Do not immerse or put under running water, even for cleaning purposes.
• Do not hold with damp hands.
•Do not hold the appliance by the casing, which is hot, but by the handle.
•Do not unplug by pulling on the cord, rather pull out by the plug.
• Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
•Do not use at temperatures below 0°C and above 35°C.
GUARANTEE : Your appliance is designed for use in the home only. It should not be used for professional pur-
poses. The guarantee becomes null and void in the case of improper usage.
9. TIPS FOR A SUCCESSFUL HAIRCUT
• Use the hair trimmer on clean, dry hair
• Dry the hair in the direction of the hairstyle you wish to obtain
• Position the person whose hair you are going to cut in such a way as to be able to see the top of
his/her head (Fig. 5)
Before starting a cut, examine the hollows and bumps on the head, which are often located at the
nape of the neck (if you place the trimmer directly against a bump, you will obtain a lighter area).
• At the beginning, only cut a small quantity of hair, until you are familiar with the length left by each
comb.
• Never stop the trimmer in mid-stroke.
• Start with the comb with the highest number (i.e. the one which leaves the most hair) before using
another comb.
Key :
=easy cut
= cut which requires some practice
= difficult cut
10. FOR A SUCCESSFUL ROUND CREW CUT
BASIC METHOD
With this method, the cut follows the shape of the skull.
• Combs necessary for this cut: 3 mm, 9 mm, 18 mm (fig. 6).
• Do not forget to change the comb as you progress through the hair.
1st STAGE : THE CUT.
a) Nape.
• Brush the hair.
• Begin by cutting the hair at the nape upwards, using comb 18 mm.
• Hold the trimmer firmly against the hair, with the comb's teeth pointing slightly upwards (fig. 7).
• Slowly raise the hair trimmer towards the top and outside of the hair, cutting only a small amount of
hair at a time (fig. 8).
• Once the hair at the nape has been evenly cut using comb 18 mm, replace the removable comb in
order to obtain the required length and repeat the first 3 operations.
• Stop the cut at regular intervals, comb the hair and check the result.
b) Sides and top
• Repeat the above operations to cut the sides.
• Change the comb as you change areas (see fig. 6).
• For the top, use the same technique, cutting the hair from the forehead to the crown, against the "lie
of the hair" (fig. 9). Then, level off to match the sides.
2nd STAGE : CONTOURS AND FINISH
a) Nape and sideburns
GB
NOT HC103 039236:039236 18/09/08 10:23 Page 6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta HC1037 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta HC1037 in the language / languages: English, German, French, Italian, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info