763508
8
Zoom out
Zoom in
Previous page
1/265
Next page
when the lamp has reached 75,000 pulses. For your comfort of use when the lamp has reached its lifetime,
the diode indicating the state of the lamp will start flashing on the control panel, warning that the lamp
has to be replaced.
To continue your epilation, you must then replace the disposable lamp making sure to remove the Pro
Precision system beforehand if you were using it.
Lamp cleaning
Check for the presence of hair, dust or fibres on the filtering glass and on the skin colour sensor.
If necessary, clean the outside of the appliance using a soft cloth. Wet a soft, lint-free cloth with a few
drops of water, and clean the contact surface and the filtering glass. To clean the lamp, switch off and
unplug the appliance.
To prevent any damage of your appliance do not use any solvent or alcool to clean the lamp.
5 - WARRANTY
This appliance is for domestic use only. It may not be used for professional purposes. The warranty will
become null and void in case of incorrect use.
6 IN WHICH CASES MAY THE APPLIANCE BE USED?
Skin colour
The treatment of too dark skin using this technology can lead to secondary effects such as burns, blisters,
and skin colour changes after healing (hyper- or hypo-pigmentation).
This product was designed with a skin sensor which checks the colours of the skin being treated at the
beginning of each session and during use. The function of this sensor is to check that any application is
suitable for the skin type concerned. The light impulse is blocked when the skin is too dark.
Hair colour
The appliance is not effective either against white or grey hair, or when the natural colour of your hair is
red or light blond. If your hair is of one of these colours, this appliance may not be suitable for you.
RECOMMENDATIONS & TIPS
Remark: After having replaced the disposable lamp, always set the energy level at a lower level than usual.
Go back to the usual power level only if you did not feel any unusual discomfort during or after treatment.
The appliance removes unwanted hair by selectively attacking the pigments inside the hair shaft. The amount
of pigment in a person's skin determines the colour, and also the level of risk to which they are exposed when
using any light based hair removal method.
8
1800142537_EP96xxF0_INSTANT SOFT BODY 170 x 180 10/11/2016 09:40 Page8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta EP9600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta EP9600 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info