13
9-TRIM AND EVEN OUT HAIR IN THE BIKINI AREA
(according to model)
Put the bikini line trimmer head in place (21). Your bikini line trimmer head is equipped
with 3 combs to lift long hairs for cutting by the blade.
Choose the desired comb before switching the appliance on.
IMPORTANT
For your first use, we advise you to use the comb for the longest cutting length.
- If you want a hair length of approximately 9 mm, use the largest comb.
- If you want a hair length of approximately 3 mm, use the smallest comb.
- If you want a hair length of approximately 6 mm, use the medium-sized comb.
Slide the comb into the two grooves on the trimmer head (a), then
set the switch to 2.
Hold the appliance upright so that you can see the appliance name,
and move it slowly against the hair.
IMPORTANT
If your skin becomes irritated, apply some talc after use.
• For a neat bikini outline
If you want a closer shave, use the bikini line trimmer head without
the comb:
Stop the appliance by pressing 0 and unplug it.
Push to remove the comb (b).
Then switch on the machine by selecting speed 1 or 2.
Hold the appliance upright and move it slowly against the hair.
IMPORTANT For greater effectiveness, pull hair outward with the other hand to make it
stand out. This will give you a more precise shave with little irritation.
10-CLEANING THE APPLIANCE
• Cleaning the epilator head
1. Unplug the epilator.
2. Press the release button on the head and remove the epilator head.
3. Rinse the epilator head under cold running water by turning it for 5 to 10 seconds.
