5
7 • Steam ironing
You can steam iron from temperature setting •• up. The steam
quantity can be adjusted between Smooth Steam (fig.12)
(continuous low pressure steam) up to High Pressure steam .
We recommend setting to High Pressure steam only when the iron
is at temperature setting •••.
8 • High Pressure Steam
Your iron is fitted with the new High Pressure Steam system
(fig.13). This technology generates higher steam pressure to enable
the steam to penetrate much faster and further into the fabric.
This way you get excellent results from your ironing.
The steam is emitted in frequent bursts rather than continuously.
The pressure generated may cause a slight noise. This is not a
technical fault!
9 • Shot of Steam
(from temperature setting •• upwards)
Press the shot of steam button to generate a powerful jet of
steam and remove stubborn creases (fig.14).
10 • Vertical shot of steam
(from temperature setting •• upwards)
Hold the iron to the vertical and press the shot of steam button
(fig.15) to remove creases from suits, jackets, skirts, hanging
curtains etc.
11 • Spray
Press the spray button to dampen stubborn creases (fig.16).
12 • Anti-Drip system*
This prevents water escaping from the soleplate when the
temperature is too low.
IMPORTANT Leave an interval of 4 seconds between each
shot and wait until the flow of steam is finished before
standing the iron on its heel.
IMPORTANT Never direct the steam at persons or animals!
TIP Hold the iron 10 to 20 centimetres away from the garment
to avoid burning delicate fabrics.
* depending on model
