739297
9
Zoom out
Zoom in
Previous page
1/71
Next page
4
(*) Depending on model
9 • Vertical shot of steam
(from temperature setting •• upwards)
T
IP Hold the iron 10 to 20 centimetres away from the garment to avoid burning
d
elicate fabrics.
Hold the iron to the vertical and press the shot of steam button ( fig.15) to
r
emove creases from suits, jackets, skirts, hanging curtains etc.
I
MPORTANT Never direct the steam at persons or animals!
10 • Spray
Press the spray button to dampen stubborn creases (fig.16).
11 • Anti-Drip system*
It prevents water escaping from the soleplate when the temperature is too low.
12 • Automatic electronic 3-position cut-off*
If, although switched on, the appliance is not moved, it will automatically switch off
a
nd the auto off light will blink after the following intervals (fig. 17):
- After 30 sec., if the iron is left standing on the soleplate or lying on its side .
-
After 8 mins., if the iron is left standing on its heel.
To switch the iron back on, move the iron gently.
AFTER USE
13 • Emptying
Unplug the iron (fig.4), pour away remaining water (fig.18) and set steam control to
.
Open and close the steam control several times (fig.19) to prevent the valve hole
into the steam chamber from scaling or blocking up.
14 • Storing
Allow the appliance to cool down before storing the iron standing on its heel
(fig.20).
IMPORTANT Do not wind the cord around the hot soleplate. Never store your
iron placed down on the soleplate (fig21).
MAINTENANCE AND CLEANING
IMPORTANT Unplug and allow the iron to fully cool down before maintenance
and cleaning.
15 • Anti-scale system
Your iron contains an anti-scale cartridge to reduce scale deposits. This
considerably prolongs the operational life of your iron.
The anti-scale cartridge is an integral part of the water tank
and does not need to be replaced.
16 • Self Clean function
(prolongs the life of the iron)
The Self Clean function flushes dirt and scale particles out of the steam chamber.
IMPORTANT Do not use descaling agents, as these damage the lining of the
steam chamber and so may impair the steam function.
Fill the water tank with tap untreated water up to the max mark and heat the iron to
the ••• temperature. Unplug the iron and hold it over a sink horizontally. Hold the
steam control into the Self Clean position (fig.5) : steam will now begin to build up.
After a few seconds water will emerge from the soleplate, rinsing dirt and scale
particles out of the steam chamber.
Move the steam control to position after approx. 1 minute.
Plug in the iron and allow the iron to heat up again. Wait until the remaining water
has evaporated. Unplug from the mains and allow the iron to fully cool down.
When cool, the soleplate can be wiped with a damp cloth.
TIP Use the Self Clean function approx. every 2 weeks. If the water is very hard,
clean the iron weekly.
17 • Cleaning the iron
When the appliance has cooled down, wipe it down with a damp cloth or sponge,
as required.
Remove the dirt from the soleplate with a damp cloth or sponge.
IMPORTANT Do not use sharp or abrasive cleaning agents or objects to clean
soleplate and other parts of the iron. If the appliance has been standing unused
for long periods, use the Self Clean function (see § 16).
1103910025 DZ5000 D1 _110x220mm 15/03/13 11:14 Page4
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DZ5140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DZ5140 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info