739610

Rowenta DZ2010 Manual

13
Zoom out
Zoom in
Previous page
1/72
Next page
GB
PROBLEMS?
If you have any further problems or queries please contact our
Customer Relations Team first for expert help and advice:
Helpline: 0845 602 1454 - UK / (01) 4610390 - Ireland
Or consult our web site: www.rowenta.co.uk
Subject to modifications !
Problems Cause Solution
The iron is
plugged in, but the
soleplate of the
iron remains cold.
No mains supply. Check that the mains plug is
properly inserted or try plugging
the iron into a different socket.
Temperature control set
too low.
Set the temperature control to a
higher temperature.
The automatic electronic
cut-out* is active.
Move your iron.
Thermostat
control light goes
on and off.
This is normal. When the thermostat control light
goes on and off the iron is heating
up. As soon as the thermostat
control light goes off the set
temperature has been reached.
None or too little
steam is being
emitted.
Steam control set on dry
position .
Turn the steam control to the
required setting area.
Not enough water in the
water tank.
Fill the water tank.
Brown streaks
come through the
holes inthe
soleplate and
stain the linen.
Residues in the steam
chamber or on the
soleplate.
Use the Self Clean function then
clean your iron.
Use of chemical
descaling agents.
Do not add any descaling agents to
the water in the water tank. Use the
Self Clean function and clean your
iron.
Fabric fibres have
accumulated in the holes
of the soleplate and are
burning.
Clean the soleplate with a
non-metallic sponge.
Vacuum the holes of the soleplate
from time to time.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Ensure linen is rinsed thoroughly
to remove any soap deposits or
chemicals on new garments which
may be sucked by the iron.
Use of starch. Always spray starch onto the
reverse side of the fabric to be
ironed and clean your iron
soleplate.
Pure distilled /
demineralised or
softened water is
being used.
Only use untreated tap water or
mix half tap water with half
distilled/demineralised water. Use
the Self Clean function and clean
your iron.
Iron is leaking. Overuse of shot of steam
button.
Allow more time between each
shot.
Soleplate temperature
too low
.
Set the temperature control to a
higher temperature.
The Anti-Drip sytem prevents water escaping from the soleplate
when the temperature is too low.
Anti-Drip system (depending on model)
Anti-Calc system (depending on model)
The integrated anti-calc system gives better quality ironing: a
constant flow of steam throughout the ironing session and longer
lasting performance of your appliance.
13
DZ 2000-ref1103904024 28/05/08 14:02 Page 13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DZ2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DZ2010 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info