739767
10
Zoom out
Zoom in
Previous page
1/70
Next page
6
E
N
Problems Cause Solution
T
he iron is plugged in, but
the soleplate of the iron
r
emains cold.
N
o mains supply.
C
heck that the mains plug is
properly inserted or try
p
lugging the iron into a
d
ifferent socket.
Temperature control set too
low.
Set the temperature control
to a higher temperature.
None or too little steam is
b
eing emitted.
Steam control set on dry
p
osition .
Turn the steam control to
t
he required setting area.
N
ot enough water in the
water tank.
F
ill the water tank.
Anti-Drip is active
(
§ 9).
Wait for the soleplate to
r
each the correct
t
emperature.
Brown streaks come
through the holes inthe
soleplate and stain the linen.
Residues in the steam
chamber or on the soleplate.
Use the Self Clean function
then clean your iron.
U
se of chemical descaling
a
gents.
D
o not add any descaling
a
gents to the water in the
water tank. Use the Self
C
lean function and clean
your iron.
Fabric fibres have
accumulated in the holes of
the soleplate and are
burning.
Clean the soleplate with a
non-metallic sponge.
Vacuum the holes of the
soleplate from time to time.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Ensure linen is rinsed
thoroughly to remove any
soap deposits or chemicals
on new garments which
may be sucked by the iron.
Use of starch. Always spray starch onto
the reverse side of the fabric
to be ironed and clean your
iron soleplate.
Pure distilled / demineralised
or softened water is being
used.
Only use untreated tap
water or mix half tap water
with half
distilled/demineralised
water. Use the Self Clean
function and clean your iron.
Iron is leaking. Overuse of shot of steam
button.
Allow more time between
each shot.
Soleplate temperature too
low .
Set the temperature control
to a higher temperature.
If you have any product problems or queries please contact our Customer Relations Team first
for expert help and advice:
0845 602 1454 - UK (01) 677 4003 - Ireland or consult our wesbite - www.rowenta.co.uk
Subject to modifications !
PROBLEMS?
1103909737 DW9210 D1_110x220mm 28/06/13 11:26 Page6
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DW9212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DW9212 in the language / languages: All languages as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info