536549
7
Zoom out
Zoom in
Previous page
1/45
Next page
5
(*) Depending on model
Helpline:
If you have any product problems or queries, please contact our Customer Relations Team
first for expert help and advice:
0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our website - www.rowenta.co.uk
Subject to modifications !
PROBLEMS
Problem Cause Solution
The iron is plugged in, but
the soleplate of the iron
remains cold.
No mains supply. Check that the mains plug is
properly inserted or try
plugging the iron into a
different socket.
Temperature control set too
low.
Set the temperature control
to a higher temperature.
The automatic electronic
shut off is active.*
Move your iron.
Thermostat control light
goes on and off
This is normal. When the thermostat
control light goes on and off
the iron is heating up.
None or too little steam is
being emitted.
Temperature control set too
low.
Turn the temperature
control to be required
setting .
Not enough water in the
water tank.
Squeeze the auto steam trigger.
Turn the steam control to
the required setting area.
Fill the water tank.
Anti-Drip* is active
(§ “USE”).
Wait for the soleplate to reach
the correct temperature.
Brown streaks come
through the holes in the
soleplate and stain the
fabric.
Residues in the steam
chamber or on the soleplate.
Use the Self Clean function
then clean your iron.
Use the Self Clean function
and clean your iron if you
have used the above.
Fabric fibres have
accumulated in the holes of
the soleplate and are burning.
Clean the soleplate with a
non-metallic sponge.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Ensure linen is rinsed
thoroughly.
Use of starch. Always spray starch onto
the reverse side of the fabric
to be ironed and clean your
iron soleplate afterwards.
Pure distilled /demineralised
or softened water is being
used.
Only use untreated tap water
or mix half tap water with half
distilled/demineralised water.
Use the Self Clean function
and clean your iron.
Iron is leaking. Overuse of shot of steam
button.
Allow more time between
each shot.
Soleplate temperature too
low.
Set the temperature control
to a higher temperature.
Use of chemical
descaling agents,
perfumed or scented
additives.
Do not add any descaling
agents, perfumed, or
scented additives to the
water in the water tank.
DW9020-30-1103905566:FerClassic_BASE_110x220mm 3/02/09 17:22 Page 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DW9035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DW9035 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info