739655
10
Zoom out
Zoom in
Previous page
1/61
Next page
4
After approx. 1 minute move the steam control slide to
the position.
Insert mains plug and allow the iron to heat up again.
Wait until the remaining water has evaporated.
Unplug from the mains and allow iron to fully cool
down.
When cool, the soleplate can be wiped with a damp
cloth.
We recommend using the Self Clean function approx.
Every 2 weeks. If the water is very hard, the iron should
be cleaned weekly.
Self Clean Valve
The self clean valve prevents the drip hole into the steam
chamber from furring or blocking up. To ensure the iron
continues to function properly, open and close the valve
by sliding the steam control to max then min a few times
after use.
F2 Anti-scale system (depending on model)
Your iron contains an anti-scale cartridge to reduce scale
deposits. This considerably prolongs the operational life
of you iron. The anti-scale cartridge is an integral part of
the water tank and does not need to be replaced.
Do not use descaling agents, as they will damage the
lining of the steam chamber and so may impair the
steam function.
F3 Anti-Drip System (depending on model)
If the temperature is set too low, the iron cannot produce
steam because of the anti-drip technology which pre-
vents droplets of water leaking from the soleplate.
After ironing
Unplug from the mains, pour away remaining water
and set steam control to . Then allow the appliance to
cool down.
Do not wind the cord round a hot soleplate.
Use the integrated cord winding facility for storage.
Store the iron standing on its heel.
Cleaning and maintenance
When cool, the iron and the soleplate can be wiped with
a damp cloth.
Do not use corrosive or abrasive cleaning agents or
sharp objects to clean the soleplate. Depending on the
model, if the soleplate is stainless steel it can be cleaned
using a Rowenta Soleplate Cleaning Stick.
Important:
If the appliance has been standing unused for long peri-
ods, hold it horizontally and allow it to emit steam for 1
minute to clean the steam ducts and remove any residue
from the iron.
G
H
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DW1251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DW1251 in the language / languages: All languages as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info