763395
15
Zoom out
Zoom in
Previous page
1/17
Next page
29
28
IS THERE A PROBLEM ?
PROBLEMS POSSIBLE CAUSES SOLUTIONS
There is no steam. The appliance is not plugged in,
or not switched on.
Check that your appliance
is correctly plugged in and
switched on.
The water level is too low. Unplug your appliance and rell it.
The steam pump has not been
primed.
Press the steam trigger continu-
ously for a few seconds to begin
steaming.
You are using the appliance for
the rst time.
Press the steam trigger continu-
ously for a few seconds to begin
steaming.
The water tank is not fully in
place.
Ensure that stopper is closed and
that the water tank snaps when
put into place.
The appliance is on standby
mode.
PLEASE REFER TO THE ‘STANDBY’
section.
The appliance
does not heat.
It is not plugged in, or not
switched on.
Plug in your appliance and
switch on.
The appliance is on standby
mode.
PLEASE REFER TO THE ‘STANDBY’
section.
Water leaks. The water tank is not fully in
place or the stopper is not closed
properly.
Ensure that stopper is closed and
that the water tank snaps when
put into place.
Steam rate
decreases.
Calc Sealing. Refer to ‘ANTI CALC section in
instructions for use.
The steam leaves
stains on the fabric
or the appliance
spits.
You are using water with
additives.
Never add any additive in the
water tank.
The appliance has not been
cleaned enough after the
descaling operation.
Read carefully the ‘ANTI CALC’
section in instructions for use.
You are using other liquids than
white vinegar to descale the
product.
Use only white vinegar during
ANTI CALC’ procedure.
Appliance steams
continuously.
The steam trigger is on the lock
position.
Unlock the steam trigger.
GUIDE DE DEPANNAGE
PROBLÈMES CAUSES POSSIBLES SOLUTIONS
Il n'y a pas de vapeur L'appareil nest probable-
ment pas branché ou mis en
marche.
Vériez que la prise est
correctement connectée et que
l'alimentation est activée.
Le niveau d'eau est trop bas. Débranchez l’appareil et remplissez
le réservoir.
La pompe à vapeur n'a pas
été amorcée.
Appuyez et maintenez pressée
la gâchette à vapeur pendant
quelques secondes jusqu'à ce que
la vapeur soit émise.
Vous utilisez l'appareil la
première fois.
Appuyez et maintenez pressée
la gâchette à vapeur pendant
quelques secondes jusqu'à ce que
la vapeur soit émise.
Le réservoir d'eau n'est pas
correctement en place.
Assurez-vous que le bouchon
est correctement fermé et que le
réservoir d'eau est enclenché en
position.
L'appareil est en mode de
veille.
Veuillez vous reporter au para-
graphe «MISE EN VEILLE ».
L’appareil ne chaue
pas.
Il n'est pas branché ou il n'a
pas été mis en marche.
Branchez le câble de l’appareil et
mettez-le en marche.
L'appareil est en mode de
veille.
Veuillez vous reporter au para-
graphe «MISE EN VEILLE ».
Il y a une fuite d’eau Le réservoir d'eau n'est
pas correctement instal
ou le bouchon n'est pas
correctement fermé.
Assurez-vous que le bouchon
est correctement fermé et que le
réservoir d'eau est enclenché en
position.
Le ux de
vapeurdiminue.
Blocage dû au calcaire Référez-vous au paragraphe
«ANTI-CALCAIRE » dans les
instructions d'utilisation.
La vapeur laisse des
taches sur le tissu ou
l'appareil crache.
Vous utilisez de l'eau avec
des additifs.
N'ajoutez jamais d'additifs dans le
réservoir d'eau.
L'appareil n'a pas été
susamment nettoyé après
l'opération de détartrage.
Lisez attentivement le para-
graphe «ANTI-CALCAIRE » dans
les instructions d'utilisation.
Vous avez utilisé d'autres
liquides que le vinaigre blanc
pour détartrer le produit.
Utilisez uniquement du vinaigre
blanc lors de la procédure «ANTI
CALC».
L'appareil émet de la
vapeur de manière
continue.
La gâchette à vapeur est en
position de verrouillage.
Déverrouillez la gâchette à
vapeur.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DR8120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DR8120 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info