613488

Rowenta DM8909 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
7DM 800 7Sprachig
TROUBLE SHOOTING
Problem Possible cause Solution
Iron is DISTILLED WATER DO NOT use 100% pure distilled water,
leaking. use tap water. In very hard water areas
mix helf tap water with half distilled to
reduce hardness; or use inexpersive
bottled spring water.
SOFTENED WATER Most softened water is alright, but if you
experience leaks or spitting, change to
untreated tap water or inexpensive
bottled spring water. DO NOT use
100% distilled water.
Auto-off activated? Move iron or gently shake.
(depending on model)
Overuse of burst of Allow more time between each burst.
steam.
Iron won't Is iron plugged in? Check plug is in socket.
heat. Thermostat set too Turn thermostat higher.
low?
Auto-off activated? Move iron or gently shake.
(depending on model)
Ready light This is normal. The light goes on and off showing the
goes on thermostat is switching the heat on and
and off. off to maintain the correct temperature.
Iron does Iron is not hot If the iron is not hot enough the anti-drip
not steam. enough. system will activate and stop the iron's
steam production. Set thermostat to
higher position. Always allow iron suf-
ficient time to heat up (indicator light
goes out) before activating the variable
steam control.
Is variable steam If iron is fitted with a variable steam
control correctly set? control, turn it to a higher setting.
Steam valve is Move variable steam control from min to
clogged. max several times to clear blockage.
STORE IRON ON HEEL (VERTICALLY) WITH STEAM CONTROL AT MIN.
For more information refer to the full use instructions.
In after using the trouble shooting guide you are still experiencing problems, do
not return the iron to the store, but contact Rowenta Consumer Service who will
be pleased to assist you.
In line with a policy of continous product improvement Rowenta reserves the
right to change product specifications without prior notice.
Service Telephone: UK 0845 602 1454, Ireland (01)4751947
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DM8909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DM8909 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info