613471
3
Zoom out
Zoom in
Previous page
1/32
Next page
3DM 500 7sprachig
BEFORE USE
Remove the transparent soleplate protector
1 Electronic 3-stage automatic switch-off (depending on model)
If the iron is switched on and not moved for a period of 8 minutes while standing
on its heel or 30 seconds while standing on the soleplate or Iying on its side,
an internal safety feature will switch the iron off and the automatic switch-off
indicator will blink. Move the appliance sharply to switch it on again.
STARTING UP
Please read the information under POINTS TO NOTE.
When using the iron for the first time, plug it into the mains electricity supply,
set the temperature control to max., do not add any water, stand the iron on
its heel and allow it to heat up in the vertical position for 2 minutes. A small
amount of smoke may be generated. This is perfectly normal and will disap-
pear after a short period of use.
STEAM IRONING
2 Adding water
Unplug the iron.
Push the steam control slide fully to the left to shut off the steam valve
(Position “min“).
Push the cover of the water fill opening downwards.
Hold the iron vertically so that the tank opening is horizontal. Fill with water
(containing no additives) up to the max. mark and close the cover.
Replenishing water
Unplug the iron.
Move the variable steam control fully to the left (Position “min“). Add water
Plug in the iron again and wait until the warning light goes off. Return the
steam control slide to the desired steam volume.
E Do not leave the appliance unattended while it is connected to the mains
supply.
E Electrical appliances generate high temperatures. Always use the handles
provided and warn other users of the potential dangers (e.g. escaping
steam or hot water, especially when ironing vertically).
E Never treat clothing which is being worn.
E Always disconnect the appliance:
– before filling or emptying the water tank;
– before leaving the room (even for a short time);
– after use.
E Never unplug the appliance by tugging on the cord.
E Only safe extension leads should be used.
E Do not immerse the appliance in water.
E An electrical appliance should not be used if:
– the appliance, the supply cord or the cord protector is damaged;
– the appliance has been dropped;
– the appliance is obviously leaking. In this case the appliance should be
returned to an approved Rowenta Service Dealer for repair. (See enclosed
list for addresses.)
E Repairs to electrical appliances may only be carried out by specialists.
Improperly carried out repairs can cause serious danger to users. To avoid
danger to users, a defective or damaged supply cord may only be re-
placed by an authorised Rowenta service centre.
E Rowenta accepts no liability for damage arising from improper use or
operation (see also POINTS TO NOTE). This appliance is for domestic use
only.
P When the appliance has reached the end of its operational life it should
be disposed of through the correct channels.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DM5909 Precision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DM5909 Precision in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info