483576

Rowenta DG9560 Manual

9
Zoom out
Zoom in
Previous page
1/10
Next page
8
Screw back and tighten up the boiler rinse cap
with a coin. Put the brush support firmly in place.
On next use, press and hold down the
Restart button and the orange boiler emptying
indicator light switches off (fig.35).
16 • Storing the generator
Press the illuminated on/off switch and unplug
the generator.
Place the iron on the iron rest plate.
Press the cord reel button and guide the cord with
your hand (
fig.36).
Press the steam flex winding button on the brush
and guide it with your hand (fig.37).
Slide the brush into its housing (fig.38).
Store the steam flex of the iron (
fig.39).
Leave the iron (and the iron rest) to cool down for
30 minutes.
You can now put your steam generator away.
A PROBLEM WITH YOUR GENERATOR
Problems Causes Solutions
The generator does not come
on. The thermostat light and
the on/off switch are not
illuminated.
The appliance is not switched
on.
Check that your appliance is correctly plugged in
and press the illuminated on/off switch.
No burst of freshness. The slide is not positioned properly.
Position the slide downwards in the
Fresh On
position.
The capsule is not positioned
properly.
Insert the capsule in its housing, pressing down
firmly until there is a “click”. Close the drawer again
by pushing it in horizontally until there is a “click”.
The capsule is empty. Change the capsule (refill capsule in the product
packaging – see § 11).
Droplets of water run through
the “Precision Steam Jet”
nozzle.
The soleplate is not hot
enough.
Decrease the steam output while ironing at low
temperature (steam output control dial on the
control panel).
Wait for the thermostat light to go out before
activating the steam control button.
Water runs out of the holes in
the soleplate or through the
diffusion nozzle along the
front of the iron.
Water has condensed in the
pipes because you are using
steam for the first time or you
have not used it for some time.
Press the steam control button away from your
ironing board until the iron or the brush produces
steam.
White streaks come through
the holes in the soleplate.
Your boiler has a build-up of
scale because it has not been
rinsed out regularly.
Rinse out the boiler when the orange indicator light
flashes (see § 15). If your water is hard, increase
the frequency.
You have already rinsed the
boiler and the orange “boiler
rinse” light is flashing.
You have not pressed for long
enough on the “Restart” button.
Hold the “
Restart
” button down for 2 to 3 seconds
to turn off the indicator light.
Brown streaks come through
the holes in the soleplate and
stain the linen.
You are using chemical
descaling agents or additives in
the water for ironing.
Never add this type of product in the water tank or
in the boiler (see § 4).
Your linen is not rinsed
sufficiently or you have ironed
a new garment before washing
it.
Ensure linen is rinsed thoroughly to remove any
soap deposits or chemicals on new garments which
have been sucked up by the iron.
The soleplate is dirty or brown
and may stain the linen.
You are ironing at too high a
temperature.
See our recommendations regarding temperature
control setting (see § 6).
Your linen is not rinsed
sufficiently and you are using
starch.
Always spray starch on the reverse side of the
fabric to be ironed.
STORING
CAUTION! Above all, you must not use
descaling products to rinse the boiler : they
may damage it.
Notice Home pressing-UK-042453 20/06/06 17:38 Page 8
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG9560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG9560 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rowenta DG9560

Rowenta DG9560 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info