739563
6
Zoom out
Zoom in
Previous page
1/52
Next page
DESCRIPTION
1 • What water to use ?
Your appliance has been designed to
operate with untreated tap water.
If your water is very hard (check with
your local water authority) it is possible
to mix untreated tap water with store-
bought distilled or demineralised water
in the following proportions: 50%
untreated tap water, 50% distilled or
demineralised water.
2 • Preparing your steam
generator
Place the steam generator on a stable,
horizontal and heat-resistant surface.
Remove the water tank using the handle
(on the front of the steam generator).
Fill the tank with water, taking care not to
exceed the maximum level
- fig.1.
Slide the tank back into its housing until
its “clicks” into place.
Unwind the electrical power cord
completely and remove the steam cord
from its housing
- fig.2.
Plug your steam generator into a mains
socket with an earth pin
- fig.3.
For best results you should use a mesh
type/vented ironing board.
TYPES OF WATER NOT TO USE: Heat
concentrates the elements contained in
water during evaporation. The types of
water listed below may contain organic
waste, mineral or chemical elements that
can cause spitting, brown staining, or
premature wear of the appliance: water
from clothes dryers, scented or softened
water, water from refigerators, batteries,
air conditioners, rain water, boiled,
filtered or bottled water. Also only use
distilled or demineralised water as
advised above.
PREPARATION
1. Cork handle of the iron
2. Humid steam control: turns to left
or right (depending on model)
3. Steam control button
4. Temperature control dial for iron
soleplate
5. Iron rest
6. Removable 1.4 L water tank
7. Scale collector cover
8. Iron positioning system
9. Steam cord
10. Steam cord storage clip
11. “Calc-Away System” scale collector
12. Control panel
a. Steam output control dial
b. “Calc-Away System” indicator
c. “Restart” button
d. “Steam ready” light
e. Illuminated on / off switch
f. ”Water tank empty” light
3
GB
F
D
NL
I
E
P
GR
FerPRO_1800113725:FerClassic_PRO_110x154mm 28/11/08 12:39 Page 3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG8890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8890 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info