Manual Rowenta DG8870 (page 7 of 58) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

544581

Zoom out

Zoom in

1/58

USE

3 • Switching on your steam

generator

Press on the on / off switch - fig.4, it

begins flashing. The green light (located

on the control panel) flashes and the

boiler heats up.

When starting, and regularly while it is

being used, your steam generator's

electric pump injects water into the boiler.

It makes a noise but this is quite normal.

The steam generator and the iron are

ready for use when the steam indicator

light is on and the iron light goes out.

4 •

Operating the control panel

• Flashing green light - fig.6 : the water is

heating up in the boiler.

• Continuous green light - fig.7 : steam is

ready for use.

• Continuous red light - fig.11 : the water

tank is empty.

• The “Calc-Away System” orange

indicator flashes - fig. 13 : the collector

needs to be rinsed.

5 • Using your steam

generator

Place the iron’s temperature control -

fig.5 to the type of fabric to be ironed and

set the steam output - fig.6. The iron

temperature control light turns on.

whenever you start using your iron and

whenever you reduce the temperature

during use, the iron is ready for use

when its indicator light goes out and

when the green light located on the

control panel comes on and remains on.

During use, when you increase the

temperature of the iron, you can start

ironing immediately, but make sure you

only increase your steam flow once the

iron’s light has gone out.

ECO Mode: Your steam genera-

tor iron has an ECO mode func-

tion which uses less power*

whilst still guaranteeing a suffi-

cient steam flow for you to iron

your garments properly. In order to use this

function, once the thermostat of your iron

has been correctly set (see table above), po-

sition the steam flow setting on the ECO

segment. The ECO mode can be used on all

types of fabrics, nevertheless for very thick

or very creased fabrics, we recommend that

you use the maximum steam flow for best

results.

While ironing, the light on top of the iron

and the steam ready light turn on and

off, as the temperature adjusts without

interrupting ironing. To obtain steam,

press on the steam control button

beneath the iron handle and keep it

pressed - fig.8. The steam will stop when

you release the button.

Always spray starch on the reverse side

of the fabric to be ironed.

The first time the appliance is used,

there may be some fumes and smell but

this is not harmful. They will not affect

use and will disappear quickly.

Recommendations: To prime the

steam circuit, either before using the

iron for the first time, or if you have

not used the steam function for a few

minutes, press the steam control

button several times in a row - fig.8,

holding the iron away from your

clothes. This will enable any cold

water to be removed from the steam

circuit.

TYPE OF

FABRIC

SETTING

TEMPERATURE CONTROL

SETTING STEAM

CONTROL

NTHETICS

(Polyester, Acetate,

Acrylic, Polyamide)

• • •

SILK / WOOL

• •

TTON

NEN

•

1800127342 DG88XX GRF Pro_110x154mm 31/08/12 09:48 Page4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8870 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rowenta DG8870

Rowenta DG8870 User Manual - German - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta DG8870 Manual

Product: