544580
9
Zoom out
Zoom in
Previous page
1/66
Next page
6. Use the steam turbo
Set the humid steam control to suit the
user (iron held with left hand or right
hand).
Press 2 or 3 times briefly on the turbo
steam control - fig. 9 to get an occasional
burst of steam iron for ironing heavy
fabrics, eliminating creases or for more
powerful vertical steaming.
7 Vertical steam ironing
Set the iron temperature control and the
steam output control dial (located on the
control panel) to the maximum position.
Hang the garment on a coat hanger and
hold the fabric slightly taut with one
hand. Press repeatedly on the steam
- fig.8 control button (beneath the iron
handle) moving the iron from top to
bottom - fig.10.
Examples of how to use the vertical
steaming function:
• Removing creases directly on hangers
from delicate fabrics that you do not
want to bring into contact with the hot
iron.
• Refreshing a shirt or a suit just before
putting it on.
8 Dry ironing
Do not press on the steam control
button.
9 • Fill the water tank again
When there is no more steam and
the”Water tank empty” light flashes -
fig.11 : water tank is empty .
Remove the water tank using the handle
(on the front of the steam generator) -
fig. 12 and fill it - fig. 1 do not fill above
the Max. level.
Push the water tank into position until it
"clicks" into place. Press the Restart
button underneath the control panel.
The steam generator and the iron are
ready for use when the steam indicator
light is on and the iron indicator goes
out.
10 • Storing the steam
generator
Press the illuminated on/off switch O/I
and unplug the generator. Place the iron
on the iron rest on the steam generator.
Fold the steam cord in two and place it in
its housing. Leave the steam generator
to cool for at least one hour before
putting it away if it is to be stored in a
ATTENTION! Use the steam turbo
function with great care because the
extraordinary power of the steam can
cause burns.
on the steam control button to obtain
short bursts of steam, without placing
the iron on the garment itself.
This will avoid making the fabric
shiny. Steam output control dial
setting: Thick fabric: increase the
steam setting. At a low temperature:
set the steam output control dial to
the low position. For delicate
fabrics(•), press the steam control
button (under the handle of the iron)
intermittently to avoid possible water
droplets appearing with the steam.
Do not place the iron on a metal
support. When taking a break from
ironing, always place the iron on the
iron rest plate of the unit. It is
equipped with non-slip pads and has
been designed to withstand high
temperatures.
As steam is very hot: never attempt to
remove creases from a garment while
it is being worn, always hang
garments on a coat hanger. For fabrics
other than linen or cotton, hold the
iron a few centimetres from the
garment to avoid burning the fabric.
If this occurs, remove the excess
water.
5
EN
1800120550 DG88XX GRF Pro_110x154mm 07/12/10 16:56 Page5
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG8860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8860 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info