613490
8
Zoom out
Zoom in
Previous page
1/66
Next page
USE
3 • Switching on your steam
generator
Press on the on / off switch - fig.4, it
begins flashing. The green light (located
on the control panel) flashes and the
boiler heats up.
When starting, and regularly while it is
being used, your steam generator's
electric pump injects water into the boiler.
It makes a noise but this is quite normal.
The steam generator and the iron are
ready for use when the steam indicator
light is on and the iron light goes out.
4
Operating the control panel
• Flashing green light - fig.6 : the water is
heating up in the boiler.
• Continuous green light - fig.7 : steam is
ready for use.
• Continuous red light - fig.11 : the water
tank is empty.
• The “Calc-Away System orange
indicator flashes - fig. 13 : the collector
needs to be rinsed.
5 • Using your steam
generator
Place the iron’s temperature control -
fig.5 to the type of fabric to be ironed and
set the steam output - fig.6. The iron
temperature control light turns on.
ECO Mode: Your steam genera-
tor iron has an ECO mode func-
tion which uses less power*
whilst still guaranteeing a suffi-
cient steam flow for you to iron
your garments properly. In order to use this
function, once the thermostat of your iron
has been correctly set (see table above), po-
sition the steam flow setting on the ECO
segment. The ECO mode can be used on all
types of fabrics, nevertheless for very thick
or very creased fabrics, we recommend that
you use the maximum steam flow for best
results.
While ironing, the light on top of the iron
and the steam ready light turn on and
off, as the temperature adjusts without
interrupting ironing. To obtain steam,
press on the steam control button
beneath the iron handle and keep it
pressed - fig.8. The steam will stop when
you release the button.
Always spray starch on the reverse side
of the fabric to be ironed.
The first time the appliance is used,
there may be some fumes and smell but
this is not harmful. They will not affect
use and will disappear quickly.
Recommendations: To prime the
steam circuit, either before using the
iron for the first time, or if you have
not used the steam function for a few
minutes, press the steam control
button several times in a row - fig.8,
holding the iron away from your
clothes. This will enable any cold
water to be removed from the steam
circuit.
Iron temperature control setting: Start
with fabrics to be ironed at a low
temperature and finish with those
which need higher temperatures. Each
time you change fabrics, wait for the
light to turn off. Mixed fibre fabrics:
set the ironing temperature to the
setting for the most delicate fabric.
Woollen garments: press repeatedly
4
TYPE OF
FABRIC
SETTING
TEMPERATURE CONTROL
SETTING STEAM
CONTROL
SYNTHETICS
(Polyester, Acetate,
Acrylic, Polyamide)
SILK / WOOL
COTTON /
L
INEN
1800120550 DG88XX GRF Pro_110x154mm 07/12/10 16:56 Page4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG8850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8850 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rowenta DG8850

Rowenta DG8850 User Manual - Dutch - 14 pages

Rowenta DG8850 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info