739539
43
Zoom out
Zoom in
Previous page
1/89
Next page
74
3 • Preparing your steam
generator
• Place the steam generator on a flat,
stable, horizontal and heat-resistant
surface.
• Lift the removable water tank (located at
the front of the steam generator)
pressing on the lock screw located on the
tank handle –
fig. 4.
• Fill the tank with untreated tap water,
taking care not to exceed the maximum
level -
fig. 5.
• Slide the tank back into its housing until
it “clicks” into place.
• Unwind the electrical power cord it
completely and remove the steam cord
from its housing-
fig.6.
• Plug your steam generator into a mains
socket with an earth pin-
fig.7.
USE
4 Switching on your steam
generator
• Press on the on / off switch - fig. 8, it
begins flashing. The green light located
on the control panel flashes
• When starting, and regularly while it is
being used, your steam generator's electric
pump injects water into the boiler. It makes
a noise but this is quite normal.
The steam generator and the iron are ready
for use when the steam indicator light is on
and the iron light goes out.
5 Operating the control
panel
Flashing green light -
fig. 8
: the water is
heating up in the boiler.
Continuous green light -
fig. 10
: steam is
ready for use.
Flashing red light -
fig. 13
: the tank is
empty.
• The
“Calc Away System” or the “boiler
rinse" orange indicator flashes -
fig. 15
or fig. 21
(according to model) : the
collector / boiler needs to be rinsed.
6 • Using your steam
generator
• Place the irons temperature control - fig.
9
to the type of fabric to be ironed (see
table below).
• The iron temperature control light turns
on. Important: whenever you start using
your iron and whenever you reduce the
temperature during use, the iron is ready
for use when its indicator light goes out
and when the green light located on the
control panel comes on and remains on.
• During use, when you increase the
temperature of the iron, you can start
ironing immediately.
ECO Mode: Your steam
generator has an ECO mode function
which uses less power whilst still
guaranteeing a sufficient steam output for
you to iron your garments properly.
In order to use this function, once the
thermostat of your iron has been correctly
set (see table above), press on the ECO
button located on the control panel.
The ECO mode can be used on all types of
fabrics, nevertheless for very thick or very
creased fabrics we recommend that you
deactivate ECO mode (by pressing the
ECO button again) to guarantee the best
results.
• During ironing the iron indicator light
switches on and off according to heating
requirements but this has no effect on
use.
The first time the appliance is used,
there may be some fumes and a slight
smell this is not harmful and will quickly
disappear.
TYPE OF FABRIC
SETTING
TEMPERATURE
SYNTHETICS
(Polyester, Acetate, Acrylic, Polyamide)
SILK / WOOL
COTTON / LINEN
• •
1800129090 DG8520 F0_110 x 154 18/01/13 15:47 Page74
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8550 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info