Manual Rowenta DG8530 (page 46 of 89) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

739538

Zoom out

Zoom in

1/89

Models without scale collector

• To prolong the life of your steam

generator and prevent the release of

scale on to your ironing, your steam

generator is fitted with an orange "Boiler

rinse” light that flashes on the control

panel when you need to drain the

appliance -

fig. 21.

• If the orange “boiler rinse” warning light

flashes, you can continue ironing

normally but remember to rinse the

boiler before you use it again.

• Place the steam generator on the edge of

your sink, with the iron placed to one

side, standing on its heel.

• Unscrew the boiler rinse cap cover anti

clockwise for a quarter of a turn - fig. 22.

• Using a coin, gently unscrew the boiler

rinse cap - fig. 23.

• Holding the steam generator in a tilted

position, and using a jug, fill the boiler

with ¼ litre of untreated tap water -

fig.

• Shake the base unit for a few moments -

fig. 25 and then empty it completely into

your sink -

fig. 26.

• To obtain the best results, we

recommend that this operation is done

twice.

• Screw back and tighten up the boiler

rinse cap with a coin - fig. 27.

• Put the boiler rinse cap cover back in

place -

fig. 28.

IMPORTANT! This operation must

not be carried out unless the steam

generator has been unplugged for at

least two hours and has cooled down

completely.

The next time you use the generator

press the “restart” button to turn off

the orange light.

The steam generator does not work

without the scale collector / boiler

rinse cap (according to model).

Regular descaling of your steam

generator helps to maintain its

steam performance over time

IS THERE A PROBLEM?

Problems Possible Causes Solutions

The steam generator does

not switch on or the iron

indicator and ON/OFF

indicator do not switch

on.

The appliance is not

switched on.

Check that your appliance is correctly

plugged in and press the illuminated on/off

switch.

Water runs through the

holes in the soleplate.

You use steam too

frequently when your iron

is not hot enough.

Wait for the thermostat light to go out

before activating the steam button.

Adjust the frequency of use of the steam

trigger to match the position of the

thermostat (see § 6).

Water has condensed in the

pipes because you are using

steam for the first time or

you have not used it for

some time.

Press on the steam control button away

from your ironing board until the iron

produces steam.

1800129090 DG8520 F0_110 x 154 18/01/13 15:47 Page77

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8530 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta DG8530 Manual

Product: