668356

Rowenta DG8409F0 PRO PRECISION Manual

39
Zoom out
Zoom in
Previous page
1/92
Next page
IS THERE A PROBLEM ? _______________________________
HELPLINE
If you have any product problems or queries with your product, please telephone our
Customer Relations team on:
0845 602 1454 (UK) - (01) 677 4003 (Ireland)
Consult our web site: www.rowenta.co.uk
33
Problems Causes Solutions
The generator does not come on
and the thermostat light is not
illuminated.
The appliance is not switched on. Check that your appliance is correctly plugged in and
press the illuminated on/off switch (on the front of the
base-unit).
Water runs out of the holes in
the soleplate.
Water has condensed in the
pipes because you are using
steam for the first time or you
have not used it for some time.
Press on the steam control button away from your
ironing board until the iron produces steam.
Y
ou use steam too frequently
w
hen your iron is not hot
e
nough.
W
ait for the thermostat light to go out before
a
ctivating the steam button.
Adjust the frequency of use of the steam trigger to
match the position of the thermostat (see § 5).
Water streaks appear on the
linen.
Your ironing board is saturated
with water because it is not
suitable for use with a steam
generator.
Check that your ironing board is suitable.
White streaks come through the
holes in the soleplate.
Your boiler has a build-up of
scale because it has not been
rinsed out regularly.
Depending on model:
- Rinse the boiler when the ""Boiler rinse" light flashes.
- Rinse the collector when the "Calc-Away System"
light flashes.
If your water is very hard, increase the frequency.
Brown streaks come through
the holes in the soleplate and
stain the linen.
You are using chemical descaling
agents or additives in the water
for ironing.
Never add this type of product in the water tank or in
the boiler (see § “for what water may be used”).
Contact an Approved Service Centre.
Your linen is not rinsed
sufficiently or you have ironed a
new garment before washing it.
Ensure linen is rinsed thoroughly to remove any soap
deposits or chemicals on new garments which may be
sucked up by the iron.
The soleplate is dirty or brown
and may stain the linen.
You are ironing at too high a
temperature.
See our recommendations regarding temperature
control setting.
You are using starch. Always spray starch on the reverse side of the fabric
to be ironed.
There is no steam or there is
little steam.
The water tank is empty (red light
on).
Fill the water tank and press the "Restart" button on
the control panel.
The soleplate temperature is set
to the maximum.
The generator is working but steam is very hot and
dry therefore is less visible. As a consequence, it is
less visible.
Steam comes out from around
the collector cover/boiler rinse
cap (depending on model).
The cap / cover (depending on
model) is not tight enough.
Tighten the stopper / collector.
The seal of the cap/cover
(depending on model) is damaged.
Contact an Approved Service Centre.
The generator is faulty. Stop using the generator and contact an
ApprovedService Centre.
The red “water tank empty”
light is on.
The water tank is empty. Press the “Restart” button on the control panel until
the indicator goes out.
Steam or water escapes under
the appliance.
The generator is faulty. Stop using the generator and contact an Approved
Service Centre.
The orange "Calc-Away System"
or "Boiler rinse" (depending on
the model) light is on.
You did not press the "Restart"
button.
Press the “Restart” button on the control panel until
the indicator goes out.
EN
1800128865_DG84XX_GRH_110x154mm 14/02/13 16:08 Page33
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DG8409F0 PRO PRECISION at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8409F0 PRO PRECISION in the language / languages: English, German, Dutch, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info