Manual Rowenta DG8409F0 PRO PRECISION (page 35 of 92) (English, German, Dutch, French, Italian, Portuguese, Portuguese, Spanish)

668356

Zoom out

Zoom in

1/92

3 • Switching on your steam

generator

Plug your steam generator into a mains

socket with an earth pin - fig.3. For best

results you should use a mesh type/vented

ironing board. Press on the on / off switch

- fig.4bis, it begins flashing. The green

light (located on the control panel) flashes

and the boiler heats up - fig.4.

When starting, and regularly while it is

being used, your steam generator's

electric pump injects water into the boiler.

It makes a noise but this is quite normal.

The steam generator and the iron are

ready to iron when the steam ready

indicator light is on, without flashing, and

the iron temperature control light is off.

The first time the appliance is used,

there may be some fumes and smell

but this is not harmful. They will not

affect use and will disappear quickly.

4 •

Operating the control panel

• Flashing green light - fig.4 : the water is

heating up in the boiler.

• Green indicator light not flashing -

fig.6 : steam is ready for use.

• Red indicator light flashing - fig.9 : the

water tank is empty.

• Orange "Calc-Away System" - fig.11 or

"Boiler rinse" - fig.17 light (depending

on model) flashes: you must rinse your

collector.

5 •

Using your steam generator

Place the iron’s temperature control -

fig.5 to the type of fabric to be ironed -

see table below. The iron temperature

control light turns on.

Important: whenever you start using

your iron and whenever you reduce the

temperature during use, the iron is fully

ready for use when its thermostat light

goes out and when the green light

located on the control panel stops

flashing and remains on.

During use, when you increase the

temperature of the iron, you can start

ironing immediately.

While ironing, the light on top of the iron

and the steam ready light turn on and

off, as the temperature adjusts without

interrupting ironing. To obtain steam,

press on the steam control button

beneath the iron handle and keep it

pressed - fig.7. The steam will stop when

you release the button.

Always spray starch on the reverse side

of the fabric to be ironed.

Recommendations: To prime the

steam circuit, either before using the

iron for the first time, or if you have

not used the steam function for a few

minutes, press the steam control

button several times in a row - fig.7,

holding the iron away from your

clothes. This will enable any cold

water to be removed from the steam

circuit.

Iron temperature control setting: Start

with fabrics to be ironed at a low

temperature and finish with those

which need higher temperatures.

Mixed fibre fabrics: set the ironing

temperature to the setting for the

most delicate fabric. If you want to use

steam on delicate fabrics (•), press the

steam control button (under the

handle of the iron) intermittently to

avoid possible water droplets

appearing with the steam.

Do not place the iron on a metal

support. When taking a break from

ironing, always place the iron on the

iron rest plate of the unit. • If you put

your thermostat in the “min” position,

the iron does not become hot.

USE __________________________________________________

TYPE OF

FABRIC

SETTING

TEMPERATURE CONTROL

SYNTHETICS

(Polyester, Acetate, Acrylic, Polyamide)

•

WOOL /

SILK

• •

COTTON / LINEN

• • •

1800128865_DG84XX_GRH_110x154mm 14/02/13 16:08 Page29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DG8409F0 PRO PRECISION in the language / languages: English, German, Dutch, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 5,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rowenta DG8409F0 PRO PRECISION Manual

Product: