656096
40
Zoom out
Zoom in
Previous page
1/50
Next page
39
ROTWILD USER MANUAL
Check the hoses and connections
regularly for any leaks. If hydraulic oil
leaks out, immediately call on a specia-
list dealer, because a leak can make the
brakes ineective. Check if you can attain
a denite pressure point. Check the wear
on the pads regularly in the viewing panel
of the brake calliper. Pull the brake lever
and check if the mounting plate of the pad
comes close to the disk. Although, in prin-
ciple, the pad material can be fully used
up, it is recommended that the pads are
changed in time. On longer rides the worn-
out pads can damage the brake disc.
Brake lever
Brake levers that can be squeezed
through all the way to the handlebar grip,
or worn brakes, can lead to insucient
braking eciency and prevent you stop-
ping in time to avoid falls or accidents
in which you and/or other persons may
be injured. Please make sure your brakes
function correctly before every ride.
Rubbing brakes
If your brake blocks rub against the disc
while riding, please check the following
potential causes:
The braking system is insuciently
„run-in“.
Check whether your wheel is seated
correctly in its axle mounting.
Check whether your wheel quick-re-
leases are secure.
Check the gap between the brake pads
and the brake discs.
Permanent rubbing of the brake
pads can lead to overheating and a reduc-
tion of braking eciency. The brakes are
an essential safety-relevant component
of your bike. Malfunctions can lead to
serious accidents. For matters concerning
your brakes, please consult a qualied
professional workshop.
Road bike brakes
Wear on the rubber brake pads may lead
to misalignment of the pads on your
rims. To avoid risks, it is necessary that
you regularly check the alignment of
the brake shoes to the rims. There must
always be a safety distance of 1-2 mm
to the bottom edge of the rim. The top
edge (close to the tyre) requires a safety
distance of 1mm. Check for wear and
correct alignment of the brake shoes, and
replace the blocks in good time, to ensure
safe braking at all times.
SHIFTING
Your ROTWILD mountain bike is equipped
with a chain gear shift system. The gears
are distributed over chain rings on the
crank and sprockets on the rear wheel.
The various gears are selected according
to the terrain or desired speed by the shift
levers mounted on the handlebars.
To avoid damage to the chain, spro-
ckets and derailleur system, only change
gear when the bike and pedals are in
motion. Never back-pedal while changing
gear.
Tips on how to change gear correctly
To prevent unnecessary wear and
damage to your gear system, you
should always change gear smoothly
and without excessive force and always
DETAILED OPERATING INSTRUCTIONS  BRAKES / SHIFTING
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotwild Tour 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotwild Tour 2015 in the language / languages: English, German as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info