656106
48
Zoom out
Zoom in
Previous page
1/52
Next page
47ROTWILD USER MANUAL | 2014
components. Any maintenance, adjustments or
dismantling of the forks/shocks should only be
carried out by an experienced bicycle mechanic.
Make sure that your suspension forks and
rear suspension always have clean sliding
tubes.
Clean your forks and the rear shock with a
soft sponge and clear water after every ride.
After cleaning and drying, apply a very thin
layer of resin and acid free lubricant to the
sliding surfaces. Suitable oils (e.g. Teflon
sprays) are available from most qualified
professional bicycle workshops.
Pedals
Check regularly that the pedals are securely
attached to the cranks. Please remember that
left and right pedals have different threads.
Crank and bottom bracket bearings
The bottom bracket installed in your ROTWILD
bike is a completely closed system with sealed
industrial standard bearings. This means that
exterior maintenance and care are not required.
You need only check if the crank is securely
mounted and the bearings are running smoothly
and without any noises. If the bottom bracket
shows signs of play, please take your bike to a
qualified professional workshop.
Wheels
Check your rims for splitting and round running.
Check the tension of your spokes regularly, they
may become loose under constantly changing
stresses.
Potential accident risk
Broken spokes and diametrically opposite
spokes must be replaced immediately. After
replacement, the front/rear wheel must be re-
centred by a qualified professional workshop.
Chain
Have the wear on your chain checked at regular
intervals by a qualified professional workshop,
at least every 1000 km. ROTWILD recommends
that you consult an approved ROTWILD dealer.
Lubricate the chain regularly, at least every 300
km.
Do not soak your chain in cleaning solu-
tions, and do not use chain cleaning devices, as
these will remove the lubricants from the chain
rollers.
Be environmentally aware – use only
biodegradable lubricants. Lubricate the chain
with an appropriate chain lubricant. Run the
chain backwards with a few turns of the crank
and wipe excess lubricant from the chain with a
dry, lint-free cloth.
Wear and replacement
Regularly check the wear on your chain.
Accurate measuring tools are available to
perform a precise check.
Because the chain is an endless construction
with no connector link, chain replacement
should only be carried out by an experienced
bicycle mechanic with the appropriate special
riveting equipment.
An incorrectly riveted chain may break and
cause a fall or accident. Please contact a
qualified professional workshop for chain
replacement.
Brakes and brake pads
Check the brake cables of your ROTWILD bike
for damage or other irregularities at regular in-
tervals. The thickness of the brake pads should
also be checked regularly and after continuous
hard use.
BICYCLE CARE
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotwild 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotwild 2014 in the language / languages: English, German as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info