622533
9
Zoom out
Zoom in
Previous page
1/34
Next page
you hear a long beep after your combination last digit and the lock does not open?
You are entering a not valid combination. Repeat the operation making attention you are
entering the correct code.
light signal flashes every 10 seconds, and, when you push a button you hear a long
beep?
You entered 4 times a wrong combination and the lock is in time penalty. Wait 5 minutes
and try again. Two more consecutive invalid codes will restart additional 5 minutes penalty
period
you do not hear any beep when you push a button?
Replace the battery. If the problem is not solved, call your service centre.
you can open but you hear a long sequence of beeps after your combination last digit?
Immediately replace the battery. (use only 9V Duracell Procell Alkaline or Energizer
batteries)
W
hat if
Press and hold Key [0] until double signal. The light remains on during the following actions.
Enter old code (double signal)
Enter new code (double signal) and repeat new code (double signal)
In case of entry errors (long signal), the old code remains valid.
Press and hold Key [3] until double signal.. The light remains on during the following action.
Enter main code.
The secondary code is deleted.
A series of signals indicates that the battery is weak and must be replaced. Use only 9V
ALKALINE - batteries! The battery compartment is located at the bottom of the entry unit.
For Entry Units ST40•xx and EC10•xx: The battery compartment is located inside the safe. In case the
battery is drained completely, uncover the power terminals in the front of the Enty Unit and power with
fresh battery. (see fig. on page 1) Keep battery pressed against the terminals until lock is completely
open.
Change code: (with safe door open, see fig. C)
Delete the secondary code: (see fig. D)
Current
supply / battery change:
TOSCANA Electronic Safe 9
01--34 TOSCANA Instruction 11.2009 :1 – 8 Mobil-5.06 print 10.11.2009 8:29 Uhr Seite 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rottner Toscana at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rottner Toscana in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info