485824

Rotho TWIN TT AQUAFILTER Manual

29
Zoom out
Zoom in
Previous page
1/39
Next page
28 ROBERT THOMAS, L.P. ©2008
Deep-Cleaning Instructions
Once you have prepared the anti-splash grid and attached the desired accessories, you can plug in
the TWIN TT, turn it on, and begin deep-cleaning.
Do not use supplementary air control during deep-cleaning!
The supplementary air switch on the wet suction hose handle must remain closed during deep-cleaning. An open
switch causes dirty solution to spill.
Refill the cleaning solution and empty the recovery tank regularly during cleaning!
Using the injection pump without solution may result in damage to the pump. When the solution tank empties, turn
off and unplug the TWIN TT. Then, refill the solution tank and empty the recovery tank.
Turn On the TWIN TT
When deep-cleaning, you must turn on the vacuum cleaner and then activate the injection pump. To
turn on the TWIN TT when deep-cleaning, do the following:
1. Press and hold the One-Touch power button. Do not release
the button yet. The vacuum turns on and the LED above the
power button turns green, then yellow. Release the button
when the LED turns yellow. This sets the TWIN TT to maxi-
mum suction strength.
2. Activate the injection pump by pressing the button on the left
side of the TWIN TT. The LED above the injection pump
Power button turns red. It is normal for the injection pump to
make a loud noise as it is activated.
Once the injection pump is activated, begin deep-cleaning.
Deep-Cleaning Instructions
Before you deep-clean a surface, make sure you have equipped the correct accessory for that sur-
face. See Deep-Cleaning Accessories on page 26 for more information. To deep-clean a surface, do
the following:
1. Make sure the vacuum cleaner and injection pump are both on.
2. Place the nozzle in one corner of the surface to be cleaned.
3. Pull and hold the check valve lever to begin spraying cleaning solution.
4. Pull the spray nozzle towards you in a steady motion. Do not release the check valve handle
until you reach the opposite edge of the surface to be cleaned.
If liquid remains on the cleaned surface, vacuum the liquid up without spraying cleaning solu-
tion. If the surface is particularly dirty, spray cleaning solution while pushing the nozzle forward
over the dirty surface and then pull it back towards yourself while continuing to spray.
2
1
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotho TWIN TT AQUAFILTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotho TWIN TT AQUAFILTER in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info