489959

Rotel RT12 Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
15
English
Note: The RDS features are entirely dependent on the broadcaster
sending properly encoded signals. Thus, they will only be available
in markets where RDS is currently implemented and where stations are
broadcasting these data signals.
RDS Button O
The RDS button on the remote control can step through the various
displays. Press the RDS button on the remote to step through the following
displays.
1. Radio Text
2. PTY, or the type of content.
3. Name of station.
4. Stereo or Mono station.
5. Current time.
6. Today’s date.
MONO Button O
The MONO button on the remote control changes the FM mode from
stereo reception to mono reception. In stereo mode, a stereo signal
will be heard if the station is broadcasting a stereo signal and there is
sufficient signal strength.
Note: Switching to mono mode can be a useful way to improve
the reception of weak or distant FM signals. Less signal strength is
required for clean mono reception than for stereo reception.
DAB RADIO
Make sure that your local area can receive Digital Audio Broadcast
(DAB) broadcasting signal.
Press the DAB 6 button on the front of the panel, or remote N.
DAB channels are categorized into ensembles, which are also known
as multiplexes. Each multiplex provides a number of stations and each
service contains a primary service that can contain secondary services.
DAB technology allow broadcasters to transmit additional data along
with the audio, which can include other audio channels, text and even
images and computer data in the future.
DAB Radio Station Playing
1. Select DAB Button from the front panel and the unit will scan for available
stations. After scanning you will see the following menu.
DAB
<Station list>
Push the PUSH-SELECT knob = to see available stations.
Storing a DAB station in a preset
While a DAB station is playing, hold down the memory button 4I,
then press the number of preset assigned from numeric pad 3H. Up
to 30 preset DAB radio stations may be stored.
Playing a preset DAB station
When a DAB station is playing, you can switch to a preset station in one
of the following ways.
1. From the numeric pad 3H, press preset number of the desired
station.
2. Press SKIP +/- 7 button on the front panel or PRESET +/- K on the
remote to call out preset numbers and corresponding station. Turn the
knob to choose the desired station, then press the knob to select, or press
the ENT key on the remote.
DAB Settings Menu
Press the DAB 6N on the front panel or remote to toggle to the DAB
settings Menu. There are 6 sub-menus. Turn the knob on the front panel or
use the UP/DOWN keys on the remote to go through each sub-menu.
1. <Station List>, shows station list.
2. <Full Scan> Start a full range scan by pressing the ENT key.
3. <Manual Scan> Press ENT and select stations manually by using
the Up/Down keys.
4. <DRC> Dynamic Range Control Select between “off”, “high” and
“low”. Press ENT and select Up/Down keys to change.
5. <Prune> Select between “Yes” or “No”. The Prune setting allows you
to remove stations that are not active or can not be received.
6. <System>, Select the Factory Default and show Software Version.
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

rotel-rt12

Reset search

  • Hi, sontec electronics have just fitted me a new streaming module into my rotel RT12 and I need to know how to get internet radio, put in my wifi key and conected to my router but just get the message pura vida 106.3fm Buffering 0% please help Submitted on 10-10-2022 at 21:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel RT12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RT12 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info