371208

Rotel rsdx 02 Manual

17
Zoom out
Zoom in
Previous page
1/39
Next page
17
English
Audio connections:
Connect the left and right analog audio out-
puts from the set-top box to the AUDIO DBS
IN LEFT & RIGHT jacks
on the RSDX-02
using a standard RCA stereo audio cable.
Digital Audio connection:
If your set-top box has a digital audio output,
you should connect it to the RSDX-02 for play-
back of Dolby Digital broadcasts.
1. If the set-top box has a coax digital out-
put, connect it to the DIGITAL 1 (DBS) in-
put
on the RSDX-02 using a coax digi-
tal cable. The RSDX-02 is pre-configured
to use this digital input for the set-top box.
2. If the set-top box only has an optical digi-
tal output, connect it to the DIGITAL 2 (TV)
input
on the RSDX-02 using an optical
digital cable. The RSDX-02 will need to be
reconfigured to associate this input with the
set-top box input. See the Setup section of
this manual.
VCR or Digital Video Recorder
See Figure 6
This section describes the hook-up of hi-fi VCRs
with audio and video outputs. VCRs connected
with RF antenna cables are connected directly
to the TV, not to the RSDX-02.
Video connections:
Your VCR may have composite video or S-Video
outputs. Choose whichever type of connection
is appropriate for your system, keeping in mind
that there must be a corresponding connec-
tion of the same type from the RSDX-02 to the
TV.
1. For composite video, connect a compos-
ite video cable from the video output of
the VCR to the VIDEO VCR IN input
on the RSDX-02. Connect the VIDEO VCR
OUT output
on the RSDX-02 to the com-
posite video input on VCR
2. For S-Video, connect an S-Video cable from
the video output of the VCR to the S-VIDEO
VCR IN input
on the RSDX-02. Connect
the S-VIDEO VCR OUT output
on the
RSDX-02 to the S-Video input on VCR.
Audio connections:
Connect the left and right analog audio out-
puts from the VCR to the AUDIO VCR IN LEFT
& RIGHT jacks
on the RSDX-02 using a stan-
dard RCA stereo audio cable. Connect the
AUDIO VCR OUT LEFT & RIGHT audio out-
puts
on the RSDX-02 to the left and right
audio inputs on the VCR.
Digital Audio connection
(for digital video recorders):
If your video recorder has a digital audio output,
you should connect it to the RSDX-02 for play-
back of Dolby Digital recordings.
1. If the video recorder has a coax digital out-
put, connect it to the DIGITAL 1 (DBS) in-
put
on the RSDX-02 using a coax digi-
tal cable. The RSDX-02 will need to be
reconfigured to associate this input with the
VCR input. See the
Setup
section of this
manual.
2. If the video recorder has an optical digi-
tal output, connect it to the DIGITAL 2 (TV)
input
on the RSDX-02 using an optical
digital cable. The RSDX-02 will need to be
reconfigured to associate this input with the
VCR input. See the Setup section of this
manual.
3. Connect the DIGITAL OUT connector
on the RSDX-02 to the digital input on the
video recorder with an optical digital cable.
CD Player/CDR Recorder
See Figure 7
Audio Connections:
1. Connect the left and right analog audio
outputs from a CD/CDR to the LEFT/RIGHT
AUDIO TAPE/CDR IN jacks
on the
RSDX-02 with a standard RCA stereo au-
dio cable.
2. With a CDR recorder, connect the LEFT/
RIGHT AUDIO TAPE/CDR OUT jacks
to the audio inputs on the CDR.
Digital Audio connections:
If your CD/CDR has digital audio connections,
you should connect them to the RSDX-02.
1. If the CD/CDR has a coax digital output,
connect it to the DIGITAL 1 (DBS) input
on the RSDX-02 using a coax digital cable.
The RSDX-02 will need to be reconfigured
to associate this input with the TAPE/CDR
input. See the
Setup
section of this manual.
2. If the CD/CDR has an optical digital out-
put, connect it to the DIGITAL 2 (TV) input
on the RSDX-02 using an optical digi-
tal cable. The RSDX-02 will need to be
reconfigured to associate this input with the
TAPE/CDR input. See the
Setup
section of
this manual.
3. When using a CDR recorder, connect the
DIGITAL OUT connector
on the RSDX-02
to the digital input on the CDR with an
optical digital cable.
NOTE
: No video connections are required for
an CD player/CDR recorder.
Audio Tape Recorder
See Figure 8
Audio Connections:
1. Connect the left and right analog audio
outputs from the audio recorder to the LEFT/
RIGHT AUDIO TAPE/CDR IN jacks
on
the RSDX-02 with a standard RCA stereo
audio cable.
2. Connect the LEFT/RIGHT AUDIO TAPE/
CDR OUT jacks
to the audio inputs on
the tape recorder.
NOTE
: No video or digital connections are
required for an audio tape recorder.
AM Antenna
See Figure 9
The RSDX-02 includes a plastic loop antenna
to receive AM radio signals. Remove this
antenna from the box and locate it near the
RSDX-02. It can be tacked to a wall, using the
mounting tab provided. Alternatively, you can
fold the center portion of the antenna to form
a tabletop stand.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel rsdx 02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel rsdx 02 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info