489974

Rotel RMB-1512 Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
6
RMB-1512 Twelve Channel Power Amplifier
for a manufacturer to do all it can to engineer products that have a
minimum negative impact on landfill sites and water tables.
At Rotel, we are proud to do our part. We have reduced the lead
content in our electronics by using special ROHS solder, while our new
Class D (not digital) amplifiers are up to five times more efficient than
our legacy designs and still deliver power and performance. These
products run cool, give minimum wasted energy, are good for the
environment and give better sound too.
Finally, we have printed this brochure on recycled paper stock.
While we understand that these are small first steps, they are still
important ones. And we continue to pursue new methods and
materials for a cleaner and greener manufacturing process.
All of us at Rotel thank you for buying this product. We are sure it will
bring you many years of enjoyment.
A Word About Watts
The RMB-1512 power output is quoted as 100 watts for each channel,
when all twelve channels are operating together at full power.
Rotel has chosen to specify the power output in this way because, in
Rotel’s experience, it gives the truest value of the receiver or amplifier’s
power capability.
When comparing specifications for different products, you should be
aware that power output is often specified in other ways, so you may
not be comparing like with like.
For example, the power output may be quoted with only one channel
operating, giving a higher maximun figure. the highly regulated power
supplies of the Rotel Classe D amplifiers ensures that they will produce
the full spcified power output to one or all channels.
A loudspeaker’s impendance rating indicates the electrical resistance
or load it offers when connected to the amplifier, usaally 8 ohms or
4 ohms. The lower the impedance, the more power the speaker will
need. In effect, a 4 ohm speaker will require twice as much power as
an 8 ohm speaker.
So ideally, the amplifier should be give double the power into a 4
ohm load – a rating of 100 watts into an 8 ohm load should become
200 watts into 4 ohms. Using lower impedance speakers makes
greater emands on the amplifier’s power supply, because it will be
drawingmore current and giving off more heat.
However, Rotel amplifiers are designed to work into any speaker
impedance between 8 and 4 ohms, and with all the channels working
up to their full power. Because the Rotel design is optimized for use
with all channels operating together, Rotel is able to specify the true
power output for all channels.
This can be important for your enjoyment, too. When watching
movies, it’s nice to have the amplifier able to reproduce full power into
all the channels at the same time, especially in the case of a volcano
exploding!.
Contents
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Figure 1: Controls and Connections 3
Figure 2: Hook-up Illustration 4
Important Notes 5
About Rotel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features 7
A Few Precautions 7
Placement 7
AC Power and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AC Power Input
0
7
Power Switch and Indictator Light
1
7
Auto Turn On/Off Mode Selector
7
7
12V Trigger Input
9
8
12V Trigger Output
9
8
Protection Indicators
2
8
Signal Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
RCA Inputs
4
8
Mono Switch
4
8
Linking The Inputs
5
8
Input Level Controls
3
8
Signal Output Link
6
8
Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Speaker Selection 9
Speaker Wire Selection 9
Polarity and Phasing 9
Speaker Wire Connections
8
9
Binding Post Connections
8
9
Plug-in Connection
8
9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Standby Power Indicator Is Not Lit 10
No Sound 10
Protection Indicator Is Lit 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
About Rotel
Our story began nearly 50 years ago. Over the decades, we have
received hundreds of awards for our products and satisfied hundreds
of thousands of people who take their entertainment seriously- like you!
Rotel was founded by a family whose passionate interest in music
led them to manufacture high-fidelity components of uncompromising
quality. Through the years, that passion has remained undiminished
and the family goal of providing exceptional value for audiophiles
and music lovers, regardless of their budget, is shared by all Rotel
employees.
Rotel’s engineers work as a close team, listening to, and fine tuning,
each new product until it reaches their exacting musical standards.
They are free to choose components from around the world in order to
make that product the best they can. You are likely to find capacitors
from the United Kingdom and Germany, semiconductors from Japan or
the United States, while toroidal power transformers are manufactured
in Rotel’s own factory.
We all have concerns about our environment. And, as more and more
electronics are produced and later discarded, it is especially important
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel RMB-1512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RMB-1512 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info