139017
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
English
AC Power Input
It is best to plug the RDV-1080 directly into a
2-pin polarized wall outlet. Avoid the use of
extension cords.
Your RDV-1080 will automatically configure
itself for the proper AC line voltage ranging
from 110 volts to 240 volts at 50/60Hz. No
setting is required to match the unit to your
local voltage.
Plug the supplied cord into the AC INPUT re-
ceptacle on the back of the unit. After all con-
nections have been made, plug the cord into
an appropriate AC wall outlet.
NOTE
: If you are away from home for an ex-
tended period of time, it is a sensible precau-
tion to unplug your audio/video components.
Basic Operation
The RDV-1080 can be operated using its front-
panel buttons or from corresponding buttons
on the supplied infrared remote control. Spe-
cific instructions for each of the basic operat-
ing controls are detailed here. Additional fea-
tures, as well as settings available from the
On-Screen Displays are described in later
sections of the manual.
STANDBY Switch
DVD POWER Switch
Standby LED
The LED above the front-panel STANDBY but-
ton illuminates when the RDV-1080 is connected
to a live AC outlet, but is in standby mode.
Press the STANDBY button or remote control
DVD POWER button to fully activate the
RDV-1080, indicated by the front-panel dis-
play being illuminated. Press either button again
to put the RDV-1080 in standby mode; the dis-
play turns off and the LED illuminates.
Pressing the OPN/CLOSE button or PLAY
will also activate the unit from standby mode.
NOTE
: You can choose to use an Auto Standby
function that puts the unit in standby mode
after 30 or 60 minutes of inactivity. See the
Setting Preferences section of this manual.
Front-Panel Display
DISPLAY OFF Button
A lighted display on the front-panel of the
RDV-1080 provides information about the status
of the unit, activation of special features, and
track/time information.
The display can be turned off by pressing the
DISPLAY OFF button which will light the LED
above the button. Press the button again to
turn the display back on.
See the illustration at the front of this manual
for the location of each section of the display:
Title/Group
displays the number of the
current
Title
or
Group
.
Chapter/Track
displays the number of
the current
Chapter
or
Track
.
Step
displays the current step number of
the program.
Audio Format
displays the digital au-
dio format of the inserted disc.
B.S.P./Bonus
indicates when a DVD
Audio disc contains B.S.P. (Browsable Still Pic-
tures) or a Bonus Group.
Disc Type
displays the type of disc in-
serted in the unit.
Function
indicates which special features
are activated.
Time Mode
indicates which time mode
is shown in the Multi-Information Window of
the Display.
Audio Channel
shows which of the six
possible audio channels are in use.
Multi-Information
shows time and status
information in an alphanumeric display.
Audio LED Indicators
Five front-panel LEDs provide information about
the format of the disc being played.
DVD Audio
lights when the disc contains
DVD Audio programming.
Sampling Rate
indicates the sampling
frequency of the digital bitstream
Disc Drawer
OPN/CLOSE Button
A motor-driven disc drawer, located in the center
of the RDV-1080, slides out to accept a disc
and retracts for playback. Place the disc in
the drawer label-side up. Make sure the disc
is properly centered in the tray. Do not use
accessory stabilizer devices.
When the disc drawer is closed, pressing the
OPN/CLOSE button opens the drawer. Press
the button again to close the drawer. The drawer
also closes when the PLAY
button is pressed.
In addition, the drawer can also be closed from
the opening On-Screen Display by moving the
cursor over the CLOSE icon and pressing the
ENTER button on the remote.
Playing a Disc
PLAY/SELECT Buttons
Press the PLAY button to start playing the
disc from the beginning. If the disc drawer is
open, it will close automatically.
The PLAY
button always starts play from the
beginning of the disc, except when it is after
the PAUSE
button has been pressed. In this
case, the disc will resume playing from the
current location.
Playback can also be started from the Open-
ing Screen Display by moving the cursor over
the PLAY icon and pressing the ENTER button
on the remote.
Stopping a Disc
STOP/CLEAR Buttons
Press the STOP button to stop a disc that is
playing. Playback will also stop when the DVD
POWER button on the remote is pressed.
The RDV-1080 memorizes the point at which
the disc stopped playing, with an option of
resuming play at that point (see RESUME but-
ton, following). This stored position remains
in memory even if the unit is put in standby
mode; however, it is erased from memory when
the disc drawer is opened.
Resuming Play
RESUME Button
The RESUME button restarts playback after it
has been stopped. Instead of playing from the
start of the disc, the RESUME button restarts
play at the last location on the disc when play
was stopped.
RDV-1080 DVD Audio/Video Player
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel rdv 1080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel rdv 1080 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info