139016
7
Zoom out
Zoom in
Previous page
1/38
Next page
7
English
Composite Input TV Connection
Connect the COMPOSITE VIDEO output
to the composite video input of your TV. Con-
nect the ANALOG AUDIO
outputs to the
audio inputs of your TV. A cable for these con-
nections is supplied.
If your TV has a single monaural audio input
instead of a pair of stereo inputs, you need to
use a “Y” cable adapter to connect the two
output channels of the RDV-1050 to the single
input.
You can improve the sound quality of the sys-
tem by connecting the audio outputs to a sepa-
rate hi-fi audio system. (See the following sec-
tion.)
S-Video Input TV Connection
If your TV has an S-video input, you should
connect it to the S-VIDEO
output of
RDV-1050 using an S-video cable. This will
produce better picture quality.
Component Input TV Connection
If your TV has component video signal input
jacks you will get better video performance
by using the COMPONENT VIDEO
out-
put jacks of the RDV-1050. The required cable
is not provided. Be sure to connect the “Y” out-
put to the “Y” input, “P
B” output to the “PB
input, and the “P
R” output to the “PR” input.
NOTES: The component signal inputs on
some TV’s have BNC type connectors. (BNC
connectors are coaxial connectors that
have keyed locking collars.) In such in-
stances adapters or a special cable may be
needed.
A Progressive Scanning signal can be
produced with both PAL (576p) and NTSC
(480p) outputs depending on the setting of
the Video Output Selector switches.
European Version Note: When Pro-
gressive Scanning is used with a PAL output
signal, set the Video Signal Selector Switch
to REMOTE.
Y
VIDEO OUTDIGITAL OUT
AUDIO OUT
COMPONENT
VIDEO
S-VIDEOFRONTREAR
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
CENTER
SUB
WOOFER
P
R
P
B
Audio/video cable
S-video cable
White
Red
Yellow
Red
White
Yellow
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
TV
TV
YP
B
P
R
Y
VIDEO OUTDIGITAL OUT
AUDIO OUT
COMPONENT
VIDEO
S-VIDEOFRONTREAR
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
CENTER
SUB
WOOFER
P
R
P
B
White
White
Red
Red
Component video cable
Red
Green
Blue
Red
Green
Blue
Audio Cable
White
Red
Red
White
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
S-video cable
NOTE: See the Video Signal Selector Switches section for information on setting the switch
for the various types of connections.
NOTE: See the Video Signal Selector Switches section for information on setting the switch
for the various types of connections.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel rdv 1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel rdv 1050 in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info