Manual Rotel rcd 1072 (page 8 of 10) (English)

161721

Zoom out

Zoom in

1/10

PROGRAM Button

This button, labeled PROG, allows you to

memorize as many as 20 tracks on the cur-

rent disc for playback in a specific order. For

example, you could instruct the RCD-1072 to

play track 5, followed by track 3, followed by

track 8. To begin a program:

1. Insert a disc and press the OPEN/CLOSE

button to close the drawer. The RCD-1072

will read the contents of the disc.

2. Press the PROGRAM button on the front

panel or the remote control. The PROGRAM

indicator will light up in the Display, along

with “P:00” indicating that the unit is wait-

ing for the first track to be memorized.

3. To program tracks from the handheld re-

mote control, enter the first track number

using the DIRECT ACCESS buttons. Your

selection will be memorized automatically

and the Display indicator will change to

“P:01”, indicating that one track has been

memorized. Continue entering the rest of

your selections using the DIRECT ACCESS

buttons. Note that there is no need to press

the PROGRAM button as each selection is

memorized as it is entered.

4. To program tracks from the front panel,

select the first track number using the TRACK

buttons. The track number and the program

number in the display will flash for 3 sec-

onds. While the display is flashing, press

the PROGRAM button to memorize your

selection. Note that once the flashing stops,

you will no longer be able to memorize

your selection. To memorize additional

tracks, select them with the TRACK buttons,

pressing the PROGRAM button after each

selection.

Once you have memorized a play list, the

RCD-1072 remains in PROGRAM mode un-

til you open the disc drawer or press the STOP

button twice in succession. If you press the PLAY

button, the memorized program will play in-

stead of the entire disc, starting with the first

selection in the memorized list.

When a PROGRAM has been memorized,

most functions that would normally affect the

entire disc operate on just the memorized

program. For example, the TRACK buttons

advance to the next track in the memorized

program, not the next track on the disc. Like-

wise, the REPEAT button (see below) continu-

ously plays the memorized program, not the

entire disc.

REVIEW Button

This button is used to review the memorized

tracks in PROGRAM mode. Press the button

and the first memorized track number will

appear in order in the Display, flashing for

approximately five seconds. Pressing the RE-

VIEW button again while the track number is

flashing will continue the review sequence,

showing the next memorized track. Continue

pressing the REVIEW button to see the com-

plete memorized track list.

If you do not press the REVIEW button while

the track number is flashing, the review pro-

cess is terminated and the unit resumes what-

ever mode it was in before you started to re-

view, except that the last reviewed track number

will remain active and shown in the display.

Note that you may remove a selection from

the play list during the review procedure us-

ing the CLEAR button, as described below.

CLEAR Button

(remote only)

This button allows you to remove a track se-

lection from the memorized program play list

during the review procedure described above.

Follow the review procedure until the desired

track number is flashing. Then, instead of

pressing the REVIEW button to continue, re-

move the displayed track by pressing the

CLEAR button while the number is still flash-

ing. You may then continue the review pro-

cedure.

RANDOM Button

This instructs the CD player to play tracks from

the entire disc in random order. Once all of

the selections have been played once, the disc

will stop playing, unless the REPEAT Button (see

below) has been engaged, in which case the

random play will continue until the STOP button

is pressed. When the RANDOM button is

engaged, the word RANDOM appears in the

Display.

REPEAT Button

This button, labeled REPT allows you to repeat

the current track or the entire disc continuously

until the feature is cancelled by disengaging

the REPEAT button or pressing STOP. The RE-

PEAT button steps sequentially through the avail-

able options. Press the button once and the

RCD-1072 will repeat just the current track, dis-

playing the indicators REPEAT 1 in the Display.

Press the button a second time and the

RCD-1072 will repeat the entire disc, display-

ing REPEAT ALL in the Display. Press the but-

ton a third time to cancel the REPEAT function.

As noted above, REPEAT can be used in con-

junction with the RANDOM play feature.

Note: The REPEAT function is automati-

cally cancelled when the disc drawer is

opened.

SCAN Button

This feature automatically plays the first ten

seconds of each track on the disc (or the memo-

rized program). To activate the feature, press

the SCAN button. The word INTRO appears

in the Display. To stop scanning and resume

normal operation at the current track, press

the SCAN button again or press the PLAY

button.

TIME Button

Normally, the RCD-1072 displays the elapsed

time of the currently playing track. The TIME

button allows you to step through two al-

ternative time displays. Pressing the button once

displays the time remaining in the current track,

which counts down as the track continues play-

ing. Pressing the button a second time displays

the time remaining on the entire disc (or memo-

rized program). Pressing the button a third time

reverts to the standard elapsed time display.

When the TIME feature is activated, the word

REMAIN appears in the Display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rotel rcd 1072 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rotel rcd 1072 Manual

Product: