Manual Rotel RA-05 (page 6 of 52) (English, German, Dutch, French, Italian, Spanish)

490010

Zoom out

Zoom in

1/52

Remote Sensor

The Remote Sensor picks up the infrared

signals from the remote control. Do not cover

or block the sensor. It must be unobstructed or

the remote control will not work properly. The

operation of the Remote Sensor can also be

affected if it is exposed to bright light, particu

larly sunlight. Certain types of lighting, such

as halogen lights, that emit a fair amount of

infrared light, can also interfere with proper

operation. In addition remote control functions

may not work reliably if the batteries in the

RR-AT94 are weak.

A Few Precautions

WARNING: To avoid potential damage to

your system, turn off ALL the components in

the system when connecting or disconnect-

ing the loudspeakers or any associated com

ponents. Do not turn the system components

back on until you are sure all the connec-

tions are correct and secure. Pay particular

attention to the speaker wires. There must be

no loose strands that could contact the other

speaker wires, or the chassis of the ampli-

fier.

Please read this manual carefully. It provides

information on how to incorporate the RA-05

into your system as well as information that

will help you get optimum sound performance.

Please contact your authorized Rotel dealer

for answers to any questions you might have.

In addition, all of us at Rotel welcome your

questions and comments.

Save the RA-05 shipping carton and all en

closed packing material for future use. Shipping

or moving the RA-05 in anything other than

the original packing material may result in

severe damage to your ampliﬁer.

Fill out and send in the owner’s registration

card packed with the RA-05. Also be sure

to keep the original sales receipt. It is your

best record of the date of purchase, which

you will need in the event warranty service is

ever required.

Placement

Like all audio components that handle low-

level signals, the RA-05 can be affected by

its environment. Avoid placing the RA-05 on

top of other components. Also avoid routing

audio signal cables near power cords. This

will minimize the chance it will pick up hum

or interference.

The RA-05 generates heat as part of its normal

operation. The heat sinks and ventilation open

ings in the ampliﬁer are designed to dissipate

this heat. The ventilation slots in the top cover

must be open. There should be 10 cm (4 inches)

of clearance around the chassis, and reason

able airﬂow through the installation location,

to prevent the ampliﬁer from overheating.

Remember the weight of the ampliﬁer when

you select an installation location. Make sure

that the shelf or cabinet can support it. We

recommend installing the RA-05 in furniture

designed to house audio components. Such

furniture is designed to reduce or suppress

vibration which can adversely affect sound

quality. Ask your authorized Rotel dealer for

advice about component furniture and proper

installation of audio components.

Cables

Be sure to keep the power cords, digital signal

cables and regular audio signal cables in

your installation away from each other. This

will minimize the chance of the regular audio

signal cables picking up noise or interference

from the power cords or digital cables. Using

only high quality, shielded cables will also help

to prevent noise or interference from degrad

ing the sound quality of your system. If you

have any questions see your authorized Rotel

dealer for advice about the best cable to use

with your system.

AC Power and Control

AC Power Input

The RA-05 does not draw high levels of current

from the power outlet. However, whenever pos

sible, it should be plugged directly into a 2-pin

polarized wall outlet. Do not use an extension

cord. A heavy duty multi-tap power outlet strip

may be used if it (and the wall outlet) can handle

the current demanded by the RA-05 and all

the other components connected to it.

Your RA-05 is conﬁgured at the factory for the

proper AC line voltage in the country where

you purchased it (either 120 volts AC or 230

volts AC with a line frequency of either 50 Hz

or 60 Hz). The AC line conﬁguration is noted

on a decal on the back panel.

NOTE: Should you move your RA-05 am-

plifier to another country, it is possible to re

configure it for use on a different line

voltage. Do not attempt to perform this con

version yourself. Opening the enclosure of

the RA-05 exposes you to dangerous volt-

ages. Consult a qualified service person or

the Rotel factory service department for in

formation.

If you are going to be away from home for an

extended period of time such as a month-long

vacation, it is a sensible precaution to unplug

your ampliﬁer (as well as other audio and video

components) while you are away.

Power Switch

and

Power Indicator

Press the front panel Power Switch button, to

turn the RA-05 on. The Power Indicator light is

illuminated when the RA-05 is on. Press Power

Switch button again to turn the RA-05 off.

Once the RA-05 has been turned on with the

front panel power switch, it can be switched

between normal operating mode and standby

mode with the Power button

on the RR-AT94

remote control.

See the “12V Trigger Outlet” section for more

information on ways you may be able to turn

on and off other components in your system

along with the RA-05.

RA-05 Stereo Integrated Amplifier

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RA-05 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rotel RA-05 Manual

Product: