532628
43
Zoom out
Zoom in
Previous page
1/120
Next page
GB-43
ENGLISH
Care/Maintenance
Care/Maintenance
We recommend checking all machine parts that could loosen
(screws, nuts, etc.) regularly every 2 to 4 weeks, depending
on the frequency of use. Use a soft, perhaps slightly moiste-
ned cloth to clean. Do not use aggressive cleaning agents.
Keep liquids of any type away from the computer and the
machine interior, as the liquids could cause considerable
functional impairments. The belt in the lower area of the
exercise machine can develop rubber skid marks. This is
completely normal.
Treadmill adjustment
After a longer period of use or after transport, the walking
belt may no longer be centred or may “slip away” during
your workout. In this case you will have to readjust the
walking belt, as damage and functional impairments could
occur.
Centring the walking belt:
You can adjust the walking belt with an M6 Allen key at the
right rear end of the main frame (see Fig.).
If the walking belt has slipped over to the right, turn the
right adjusting screw clockwise (no more than a 1/4 revolu-
tion).Then let the treadmill run for at least 2 revolutions to
check if the adjustment is suffi cient. Repeat this procedure
until the belt is centred.
If the walking belt has slipped over to the left, turn the
right adjusting screw anti-clockwise (no more than a 1/4
revolution). Then let the treadmill run for at least 2 revolu-
tions to check if the adjustment is suffi cient. Repeat this
procedure until the belt is centred.
Tensioning the walking belt:
You can tension the walking belt with the two adjusting
screws at the right rear end of the main frame (see Fig.).
Turn the left and right adjusting screws evenly a quarter
turn to the right (clockwise). Use an M6 Allen key for this.
Then switch on the treadmill and check if it is suffi ciently
tensioned.
Repeat the procedure until the walking belt stops “slipping
away” during running. However, never turn the adjusting
screws more than a quarter turn after each check. If the
walking belt is adjusted too tightly, evenly loosen both ad-
justing screws.
You must disconnect the mains plug from the power
outlet before any care and maintenance work! MORTAL
DANGER!
DANGER
Make sure the treadmill is not in operation during the
adjustment. Remove the safety key to ensure your safety.
WARNING
Make sure not to tension the walking belt too strongly
as this results in increased wear or even damage.
WARNING
REX_Trainer_TX600_12.indd GB-43REX_Trainer_TX600_12.indd GB-43 24.05.12 15:2024.05.12 15:20
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler REX Trainer TX600 12 88734 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler REX Trainer TX600 12 88734 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 11,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info